Jsw-615 adhesive film instructi***: Please empty a ***all section of glue before dispensing. Heat melt the jsw3542615 adhesive film at a c***tant temperature of 110 ℃, apply the adhesive to the part to be bonded with the dispensing equipment, complete the bonding within 2 minutes, and maintain the pressure in the fixed tool for 10-20 minutes before moving to the next position. It is not recommended to heat each 615 adhesive film continuously for more than three hours. The same 615 adhesive film cannot be heated three times. Heating for a long time will make the rear part of the rubber tube touch the air temperature and form a crust, which can be pierced to reduce the glue pressure.
The above is a brief introduction of 615 adhesive film. For detailed data, please go to the download window of jinshengwei official website. The following is the informal information of 615 adhesive film for reference only.
JSW Company has formed a circular economy operation, allowing 615 adhesive film users to obtain corresponding benefits through a reasonable benefit mechani***, and assembly enterprises voluntarily engage in the production mode under the circular economy mode. It should be pointed out that this kind of benefits must be obtained by engaging in circular economy production, so as to h***e realistic incentive effect on 615 adhesive film downstream enterprises, and only in this way can the circular economy chain formed between 615 adhesive film enterprises be relatively stable. However, 35% of the 615 adhesive film downstream users in our country, such as electronics, digital and various industries, are produced by JSW and over 45% are imported. Therefore, people in the industry believe that JSW 615 adhesive film has huge development space.
Brand competitiveness dominates all other competitive abilities of 615 adhesive film enterprises. Brand competitiveness is the ability in the core position. Brand competitiveness is the ability accumulated by 615 adhesive film enterprises for a long time and is deeply rooted in the enterprises. Its function is long-term and generally does not change qualitatively with the changes of the environment. Therefore, it has the characteristics of continuity and non-contingency. The competitiveness of 615 adhesive film brand has the ability to extend and enable enterprises to expand their potential. The competitiveness of 615 adhesive film brand has the ability to build competition barriers. The basic conclusion is that brand competitiveness is the deep-seated reason why 615 adhesive film brand has greater market influence, higher share, higher added value and longer life cycle than similar products. JSW brand competitiveness is the external manifestation of enterprise core competitiveness.
At present, due to the extensive use of adhesive bonding in various fields, especially in ***iation, the general nondestructive testing method has become a basic requirement in actual production and use. The adhesive joint strength is composed of the adhesive strength of 615 adhesive film and the glued joint and the cohesive strength of 615 adhesive film. The non-destructive testing methods for bonded structures described here all take adhesive strength greater than cohesive strength as a prerequisite. There are many researchers at home and abroad on 615 adhesive film nondestructive testing methods. However, most of them are still in the scope of nondestructive testing and cannot reflect the bonding strength. Currently, the self-made 615 adhesive film bonding quality tester in China can indirectly provide the bonding strength value. In addition, holographic method, infrared method, acoustic inspection, X-ray fluoroscopy inspection and other inspection methods can be used to inspect the bonding quality of 615 adhesive film.