压住材料。克服传统的模具设计结构，在卸料板上开出容料间隙(即模具闭合时，卸料板与凹模贴合，而容纳材料处卸料板与凹模的间隙为材料厚t-0.03～0.05mm)。如此，冲压中卸料板运动平稳，而材料又可被压紧。关键成形部位，卸料板一定做成镶块式结构，紧固件报价，以方便解决长时间冲压所导致卸料板压料部位产生的磨(压)损，而无法压紧材料。
Press the material. In order to overcome the traditional mold design structure， the clearance of material is opened on the discharge plate (i.e.， when the die is closed，紧固件哪家好， the discharge plate and the die are fitted， and the gap between the discharge plate and the die is t-0.03 to 0.05mm). In this way，紧固件厂家， the discharging plate moves ***oothly， and the material can be pressed tightly. In the key forming part，紧固件， the discharge plate must be made into an inlaid structure to facilitate the solution of the grinding (pressure) loss caused by the pressing part of the unloading plate for a long time， and the material can not be pressed.
检查、核对模具和冲压机床。在安装模具前，要确认冲压机床为冲压工艺指定的型号，并检查模具的尺寸、工作要求是否与指定冲压机床的技术参数（装模高度、滑块行程等）相匹配，冲压机床的状态足否良好。
Check and check die and stamping machine. Before installing the mould， it is necessary to confirm that the stamping machine is the designated type of the stamping process， and check the size of the die and the work requirements to match the technical parameters of the designated stamping machine (the height of the die， the slider stroke， etc.)， and the state of the stamping machine is good or not.
增设强压功能。即对卸料镶块压料部加厚尺寸(正常的卸料镶块厚H 0.03mm)，以增加对凹模侧材料的压力，从而***冲切时冲压件产生翻料、扭曲变形。
Additional pressure function. In order to increase the pressure on the material of the die side， the pressure of the material in the die side is increased by the thickness of the material of the unloaded insert (normal unloaded insert thickness H 0.03mm)， so as to suppress the turning and distortion of the stamping parts.
紧固件哪家好-紧固件-圣霖国际【客户至上】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（）在行业专用设备这一领域倾注了无限的热忱和热情，圣霖国际一直以客户为中心、为客户创造价值的理念、以品质、服务来赢得市场，衷心希望能与社会各界合作，共创成功，共创辉煌。相关业务欢迎垂询，联系人：王秋。