花键联接由内花键和外花键组成。内、外花键均为多齿零件，在内圆柱表面上的花键为内花键，在外圆柱表面上的花键为外花键。显然，花键联接是平键联接在数目上的发展。
The connection of the spline is made up of the inner and outer spline. The inner and outer spline are multi tooth parts， and the spline on the surface of the inner cylinder is the inner spline， and the spline on the outer cylindrical surface is the outer spline. It is that the spline connection is the development of the number of flat bond connecti***.
型面联接：是利用非圆剖面的轴与相应形状的零件的毂孔配合而构成的联接，圣霖联接机报价，作为机械传动中的联接方式，型面联接相对于传统的键联接相比，具有联接强度高，没有应力集中，可以传递大扭矩且效率高的同时也可以承受冲击载荷，圣霖联接机多少钱，并且对于一些大型机械装备来讲其拆装方便及维修便利。
is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection， as the connection mode in mechanical tran***ission， compared with the traditional linkage type surface connection compared with connecting strength，圣霖联接机， no stress ， can large torque and high efficiency at the same time it can withstand the impact load， and for some large mechanical equipment for its disassembly and convenient maintenance.
一个切向键只能传递一个方向的转矩，传递双向转矩时，须用互成120°～130°角的两个键。用于载荷很大，对中要求不严的场合。由于键槽对轴削弱较大 ，圣霖联接机采购，常用于直径大于100mm的轴上。
A tangent key can only transfer the torque of one direction. When the two-way torque is passed， the two keys of 120 to 130 degrees are required. An occasion for he***y load and no strict requirement. As the keyway is greatly weakened to the axis， it is often used on a shaft with a diameter larger than 100mm.
圣霖联接机报价-圣霖联接机-圣霖国际【精益求精】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（）为客户提供“型材设备,轧钢设备,轨道设备”等业务，公司拥有“圣霖”等品牌。专注于行业专用设备等行业，在辽宁 鞍山 有较高知名度。欢迎来电垂询，联系人：王秋。