轧辊设备-圣霖国际【诚实守信】-轧辊

(1)软辊；肖氏硬度约为30一40，轧辊，用于开坯机、大型型钢轧机的租轧机等。

(2)半硬辊：肖氏硬度约为40一60，用于大型、中型、小型型钢轧机和钢板轮机的租轧机。

(3)硬面辊：肖氏硬度约为60一85，用于薄板、中板、中型型钢和小型型钢轧机的稿轧机及四辊轧机的支撑辊。

(4)特硬辊le氏硬度约为85—100，用于冷轧机。

(1) soft roll; the hardness of Shaw is about 30 40. It is used for the renting rolling mill of the billet machine and the large steel mill.

(2) semi hard roll: the hardness of the Shaw is about 40 to 60. It is used for the renting rolling mill of large，轧辊报价， medium， ***all type steel mill and steel plate turbine.

(3) hard roll: Shore hardness of about 60 to 85， for supporting roller mill release sheet，轧辊设备， plate， medium and ***all steel mill and four roller mill.

(4) the hardness of the hard roll Le is about 85 - 100 for cold rolling mill.

轧机布置和道次设计

机架在生产线的位置以及道次设计对轧辊的选择有很大影响。根据机架位置，轧辊哪家好，轧辊的受力方式和性能可以有很大变化。这是因为应用于粗轧机架和精轧机架的轧辊有非常不同的受力方式，从而导致轧辊性能有预期的改变.

Rolling mill layout and pass design

The of the rack in the production line and the design of the pass h***e great influence on the choice of the roll. According to the of the frame， the force and performance of the roller can be greatly changed. This ibecause the rolls used in roughing mill stand and finishing mill stand h***e very different forces， resulting in expected changes in roll performance.

由于轧制过程是连续的过程，因此操作人员需要不断检测轧辊状况，使生产出来的产品满足用户对更严格的公差和表面质量的要求。

As the rolling process is a continuous process， the operator needs to continuously detect the roll status to meet the more stringent tolerance and surface quality requirements of the products produced.