合理的模具设计。在级进模中,下料顺序的安排有可能影响到冲压件成形的精度。针对冲压件细小部位的下料，一般先安排较大面积之冲切下料，再安排较小面积的冲切下料，以减轻冲裁力对冲压件成形的影响。
Reasonable mold design. In progressive die, the order of blanking sequence may affect the accuracy of stamping forming. In order to reduce the impact of punching parts, the punching and cutting blanking of ***all area is arranged in the light of the blanking of the ***all parts of the stamping parts.
槽钢的锯削：槽钢的锯削与扁钢一样，但是要分二次从宽边面往下锯，不能在一个面上往下锯，应尽量做到在长的锯缝口上起锯，因此工件必须多次改变夹持的位置。
Channel steel sawing: the channel sawing of the channel steel is the same as that of the flat steel, but it must be sawed down two times from the wide side, and can not be sawed down on one surface, and should be sawed on the long saw mouth as far as so the of the clamping must be changed many times.
深缝：锯削深缝时即当锯缝的深度超过锯弓高度时，高度时，锯弓就会与工具相碰，无法继续锯削；此时应将锯条拆出，将锯条转90。
Deep seam: when sawing deep seams, when the depth of the sawblade exceeds the height of the saw bow, when the height is high, the saw bow is touched by the tool and can not continue to be sawed; the saw strip should be removed and the saw blade is turned 90.