玻璃覆膜机技术简介
一、产品特点概述
该机是根据玻璃的安全防爆及楼体施工时对玻璃安装施工保护新要求专门开发的防爆膜和中空玻璃保护膜覆膜机。该机主要适用于单层、多层中空玻璃、以及各类板面平整的产品进行保护膜敷贴的专用机械设备。
随着该设备的推出，在保留原有玻璃等平板类贴膜工艺要求的基础上，成功解决的传统的单片玻璃覆膜机在为中空玻璃贴膜时出现的破碎以及中心贴敷不到的难题。市场上原有的设备因为结构原因在调整不当时，由于上压辊下落的幅度不同、无法保证上下辊始终平行，造成中空玻璃单边受力过于集中出现的玻璃破碎现象和中空玻璃中心位置覆膜出现严重的空鼓问题。整机结构简单、操作方便、控制灵活的特点，非常适应广大平面板材生产厂和中空玻璃制造厂的需求。根据客户要求，我厂可以提供的产品组合灵活多变。选装辅助翻片上下片台、拼接组合覆膜、定尺纵向、横向裁切保护膜等，中空玻璃贴膜机，中空玻璃覆膜机，玻璃覆膜机，玻璃贴膜机，镜子贴膜机，镜子覆膜机，淋浴房玻璃覆膜机，淋浴房玻璃贴膜机。
The machine is based on the safety of glass explosion-proof and body building c***truction of glass installation and c***truction protection of new requirements specially developed explosion-proof membrane and insulating glass film laminating machine. The machine is mainly used for the single layer, multilayer insulating glass, and all kinds of flat surface products for protective film application of special machinery and equipment. With the introduction of the equipment, in the preservation of the original glass and other plate-like film processing requirements, based on the successful solution of the traditional monolithic glass laminating machine for insulating glass film when the fragmentation and the central sticking to the problem. The original equipment in the market because of structural reas*** in the adjustment is not at that time, because of the range of the fall of the roller is different, can not guarantee the upper and lower rollers are always parallel, resulting in the insulating glass unilateral force too concentrated in the glass fragmentation phenomenon and the center of the Hollow Glass film covered with a serious The machine has the advantages of simple structure, convenient operation and flexible control, which adapts to the demand of flat plate production plant and insulating glass factory. According to customer requirements, our factory can provide a flexible combination of products. Optional auxiliary flip-chip upper and lower stage, splicing combined laminating, fixed-length longitudinal, transverse cutting protective film, etc
二、主要技术参数 Technical Parameter
电源 Voltage AC220V 50/60Hz
电动机功率 Power 0.75KW
覆膜玻璃的厚度 Glass Thickness 2mm-40mm
***大玻璃尺寸 Maxi. Glass Size W1600*L2400mm
***小玻璃尺寸 Mini Glass Size L400*W200mm
贴膜速度变频可调 Speed: 0.5~7m/s
可以安装的膜卷规格 Film Roll Specification: Roll dia.70~80mm、膜外径不大于260mm、Film out diameter : less than dia.260mm/膜面不长于1600mm film width less than 1600mm.
标准上料操作台面尺寸 infeed table size L1000 * W1650 * H850mm
标准下料操作台面尺寸 Outfeed table size L1000 * W1650 * H850mm
整机外形尺寸 Dimension L2200 * W2150 * H1460mm
工作辊面高度 Working height: H850mm +/-20
中空玻璃覆膜机、贴膜机
主要技术参数
电源 AC380V 50Hz
电动机功率 0.75KW
覆膜玻璃的厚度 1.5mm-40mm
***大玻璃尺寸 1800*2400mm标准台
***小玻璃尺寸 400*200mm
覆膜速度变频可调 0.5~7m/s
可以安装的膜卷规格 筒径60~80mm、长度不大于1800mm 主机
标准上料操作台面尺寸 L700 * W1850 * H800mm
标准下料操作台面尺寸 L1100 * W1850 * H800mm