简单来说钣金件是金属薄板壳体，冲压件就是用拉伸机或冲床等加工的工件1，钣金件在折弯过程中厚度不会有变化，但在汽
车钣金壳体中应为敲击等原因，一部分表面会有一定变化。冲压厂是不能确定落料尺寸的，应该是在定做模具时由模具厂试定出来的。
In a simple way, the sheet metal part is a metal sheet shell, and the stamping part is 1 of the workpiece, which is processed by a drawing machine or a punch press. The thickness of the sheet metal parts will not change during the bending process, but in the steam.
The surface of the automobile shell should be knocked and so on. Part of the surface will change. The stamping plant is unable to determine the blanking size. It should be determined by the mold factory when making the mould.
管材的锯削：选用细齿锯条，当管壁锯透后随即将管子沿着推锯方向转动一个适当角度，再继续锯割，依次转动，直至将管子锯断。锯割时管子必须夹正。
Cutting of pipe: select a fine toothed saw blade, when the tube wall is sawed through a proper angle along the direction of the push saw, then continue sawing and turn, until the pipe is sawed. When sawing is cut, the pipe must be clamped.
清除冲压机床滑块底面、工作台面（或垫板平面）以及模具的上、下模座平面内的任何杂物或***。手工扳动冲压机床飞轮（或操纵点动按钮），调整上滑块到上死点位置，并转动调节螺杆，将连杆长度调到短（即闭合高度大）。
Remove any material or foreign object on the bottom of the stamping machine slide, working table (or pad plane), and the upper and lower die base of the mold. Manually pull the stamping machine flywheel (or point moving button), adjust the upper slider to the upper dead point, and rotate the adjusting screw, the length of the connecting rod to the shortest (i. e. the maximum height of the closed height).