企业资质

上海微敏自控技术有限公司

普通会员第18年

企业等级：普通会员

经营模式：

所在地区：上海上海

联系卖家：

手机号码：

公司官网：www.mtt.cn

企业地址：

本企业已通过工商资料核验！

查看营业执照

企业概况

上海微敏自控技术有限公司（MTT）专注于“运动工程”相关领域,为设备制造商及广大用户提供“精度”与“运动特性”。感谢各界多年来的信赖，选择上海微敏（MTT）为您的运动控制伙伴。我们的使命是:提供工程专业，客户服务，以及关键零组件......

详细了解

Galil运动控制卡集成驱动器

产品编号：1935495 更新时间：2020-08-12

价格：

来电议定

上海微敏自控技术有限公司

主营业务：运动控制器、运动控制卡、光栅尺、磁栅尺、精密平台
公司官网：www.mtt.cn
公司地址：

联系人名片：

联系时务必告知是在"产品网"看到的

产品详情

产品详细说明

DMC-2143-DC24+AMP20540

AMP20540

AMP-205x0 2- and 4-axis 500W Servo Drives：
The AMP-20540 contains four transconductance, PWM amplifiers for driving brushless or brush-type servo motors.Each amplifier drives motors operating at up to 7 Amps continuous, 10 Amps peak,18–60 VDC (***ailable voltage at the motor is 10% less). The gain settings of the amplifier are user-programmable at 0.4 Amp/Volt, 0.7 Amp/Volt and 1 Amp/Volt.The switching frequency is 60 kHz.The
amplifier offers protection for over-voltage,under-voltage, over-current, short-circuit and over-temperature.Theamplifier status can be read through the DMC-21x3 controller, and the BS command allows easy hall sensor set-up.A 2-axis amplifier board

the AMP-20520 is also ***ailable. In a standard configuration the
DB-28040 I/O board will not install next to an AMP-20540, however the
AMP-20540 provides 8 uncommitted analog inputs with 12-bit ADC
(16-bit optional)

DMC-2143-DC24+AMP20440

DMC-2143-DC24+AMP20542

Galil DMC-2143-DC24四轴运动控制卡可选的附件规格

端子板	ICM-20100	Provides D-sub connectors for cost-effective connection to external drives
	ICM-20105	Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs
	ICM-20105T	Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs

驱动器	AMP-20420	Contains two 200W PWM drives for driving brush-type servo motors
	AMP-20440	Contains four 200W PWM drives for driving brush-type servo motors.
	AMP-20341	Contains four *all 20W linear drives for driving *all brush-type servo motors
	AMP-20520	Contains two 500W PWM drives for driving brushless or brush-type servo motors
	AMP-20540	Contains four 500W PWM drives for driving brushless or brush-type servo motors
	AMP-20542	Contains four PWM drives for driving brushless or brush-type servo motors(3Amps Continuous, 5Amps peak at 18-60VDC). Software selectable for low inductance motors .
	SDM-20240	Contains four ***all drives for stepper motors operating in full/half step mode
	SDM-20620	Contains two drives for stepper motors operating in microstepping mode
	SDM-20640	Contains four drives for stepper motors operating in microstepping mode

附件	DB-28040	Provides 40 additional digital I/O and eight analog inputs
附件	DB-28104	Provides sinusoidal interpolation for Sin/Cos encoders