PA6 K224-PG3荷兰D***---K224-pg3 is a kind of polyamide 6 (nylon 6) material, which contains 15% glass fiber reinforced material. The product is available in Europe,.
The main characteristics of akulon? K224-pg3 are as follows:
Flame retardant / rated flame
Impact modification
Unit system test method for physical properties after drying and adjustment
Density: 1.20 -- g / cm? ISO 1183
Shrinkage: ISO 294-4
Vertical flow direction 1.0 --% ISO 294-4
Flow direction 0.40 --% ISO 294-4
Water absorption ISO 62
Saturated, 23 ° C 6.8 --% ISO 62
Balanced, 23 ° C, 50% RH 2.0 --% ISO 62
Mechanical properties - unit system test method after drying and adjustment
Tensile modulus 5400 2600 MPa ISO 527-2
Tensile stress (fracture) 105 60.0 MPa ISO 527-2
Tensile strain (fracture) 4.0 15% ISO 527-2
Impact performance - unit system test method after drying and adjustment
Notched impact strength of simply supported beams ISO 179 / 1ea
-30°C 9.0 9.0 kJ/m² ISO 179/1eA
23°C 16 25 kJ/m² ISO 179/1eA
Notchless impact strength of simply supported beams ISO 179 / 1eu
-30°C 70 70 kJ/m² ISO 179/1eU
23°C 70 90 kJ/m² ISO 179/1eU
Unit system test methods for thermal performance, drying and conditioning
Hot deformation temperature
0.45 MPa, UN annealed at 205 - - C ISO 75-2 / b
1.8 MPa, UN annealed 185 - - C ISO 75-2 / A
Linear coefficient of thermal expansion ISO 11359-2
Flow 3.0e-5 -- cm / cm / ° C ISO 11359-2
Transverse 8.0e-5 -- cm / cm / ° C ISO 11359-2
Unit system test method for electrical performance after drying and adjustment
Surface resistivity -- > 1.0e + 15 ohms IEC 60093
Volume resistivity > 1.0e + 15 > 1.0e + 15 ohms · cm IEC 60093
Dielectric strength: 25.20 kV / mm IEC 60243-1
Relative permittivity IEC 60250
100 Hz 3.60 14.0 IEC 60250
1 MHz 3.30 4.50 IEC 60250
Dissipation factor IEC 60250
100 Hz 0.010 0.15 IEC 60250
1 MHz 0.018 0.12 IEC 60250
Leakage tracking index -- 500 V IEC 60112