UV Integrator 160
+ UV-intensity mW/cm2
+ UV-dose mJ/cm2
+ selectable “triggered mode”*
+ LCD display
+ temperature °C/°F
+ SD Memory Card Slot
+ graphic chart on PC
+ re-chargeable accu cells with charger
The UV Integrator 160 is a ***all, self-contained, high quality UV measuring instrument. It is designed to
measure and display peak UV intensity in mW/cm2, UV dosage in mJ/cm2 and temperature in the UV
curing process.
In the standard version it is equipped with one UV sensor and one temperature sensor for the measuring
of:
Full UV 250 – 410 nm
Temp 32 to 230° F / 0 to 110° C
With this total UV band peak energy and dose measuring, most of the measuring requirements of UV
curing applicati*** can be covered.
Due to its UV sensor and the integrated microprocessor the UV Integrator 160 can measure and display
the peak UV-intensity of the total UV spectrum (mW/cm2).
Additionally, this UV-measuring instrument is calculating the UV-dosage (mJ/cm2) of the UV energy
supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total
Integral of UV-dosage over the full UV spectral bands.
An extra sensor is measuring temperatures from 32 to 230° F / 0 to 115° C.
The sensors are on the back of the unit which also serves as a heat shield. After completion of the
measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display.
*This Integrator features a selectable „triggered mode“, i.e. the 60 sec recording cycle starts within a 120
second readiness phase not before the incident UV-intensity exceeds 2 mW/cm².
This microprocessor integrator is additionally equipped with an SD Memory Card Slot. All measuring data
are stored on an SD-Memory Card and can be downloaded to a computer. The special evaluation
software allows to show, edit and store a history of the measuring results of the entire measuring cycle as
graphic and numeric charts (mW/cm2),(mJ cm2) and (°C/°F).
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy
s***ing and extension of the battery service life.
The UV Integrator 160 is ***ailable in five different measuring ranges:
(Please state upon order)
UV能量计( UV-Int160 ):
UV能量计 ---UV-int160增强型UV能量计
UV能量+UV强度+温度+电脑曲线 只要测试1次！！
技术数据>>>
仪器适用： 测量UV紫外光强度，能量，温度，
仪器装有软件，具有记忆功能，能联电脑使用。
波长范围： UV 250 - 410 nm
输入功率： 0 -- 5,000 mW/
测量范围： 0 -- 2,000 mW/cm2
显示范围： 0 -- 36,000 mJ/cm2
能量显示： 2×16位LCD液晶
测量精度： &plu***n; 5 %
测量温度： 0--120°C
取样速度： 0.01 秒(100次/秒)
记录周期： 120秒.
仪器电源： 2 ×3.0 V 锂电池
仪器功耗： 20 uA
电池寿命： 2,000
仪器尺寸： 120×70×13 mm
仪器重量： 200 g
工作极限： 置于110°C 测量环境中≯10秒
仪器功能：
1.仪器装有UV传感器与微处理器；
2.装有测量记忆软件，能将测量到的光强度、能量、温度值输入到电脑里；
3.具自动关机功能；
4.置于仪器背后的传感器上覆有保护材料
订货编号：
SZ1048-2-1 Item 48.2.1 UV Integrator 160, Type 1 Diazo 350 – 460 nm + Temp
SZ1048-2-2 Item 48.2.2 UV Integrator 160, Type 2 UV-A 315 – 410 nm + Temp
SZ1048-2-3 Item 48.2.3 UV Integrator 160, Type 3 UV 250 – 410 nm + Temp
SZ1048-2-4 Item 48.2.4 UV Integrator 160, Type 4 UV-B 280 – 315 nm + Temp
SZ1048-2-5 Item 48.2.5 UV Integrator 160, Type 5 UV-C 230 – 280 nm + Temp
SZ1048-2-6 Item 48.2.6 UV Integrator 160, Type 6 UV-V 395 – 445 nm + Temp