标准型号(standard modle)
型号 Model |
处理流量 Nm3/min 7kgf/c㎡ |
接口尺寸 Connection Size |
外形尺寸Suze(mm) | 滤芯Element | ||
高度Hight | 宽度 width |
型号No. | 数量 Qty |
|||
HF-(等级)001/2(功能) | 0.6 | G1/2" | 160 | 105 | E(等级)-12 | 1 |
HF-(等级)001(功能) | 1.2 | G1/2" | 210 | 105 | E(等级)-16 | |
HF-(等级)002(功能) | 2.4 | G1/2" | 275 | 105 | E(等级)-20 | |
HF-(等级)004(功能) | 3.8 | G1" | 295 | 133 | E(等级)-24 | |
HF-(等级)005(功能) | 5 | G1" | 420 | 133 | E(等级)-28 | |
HF-(等级)007(功能) | 7 | G1-1/2" | 510 | 164 | E(等级)-32 | |
HF-(等级)010(功能) | 11 | G1-1/2" | 625 | 164 | E(等级)-36 | |
HF-(等级)013(功能) | 14 | G2" 或DN50 | 730/1008 | 194/369 | E(等级)-40 | |
HF-(等级)018(功能) | 18 | G2" 或DN80 | 875/1103 | 194/369 | E(等级)-44 | |
HF-(等级)022(功能) | 22 | G2" 或DN50 | 1030/1225 | 164/360 | E(等级)-48 | |
HF-(等级)026(功能) | 26 | DN80 | 1325 | 409 | E(等级)-40 | 2 |
HF-(等级)035(功能) | 35 | DN80 | 1325 | 409 | E(等级)-44 | |
HF-(等级)045(功能) | 45 | DN100 | 1325 | 409 | E(等级)-48 | |
HF-(等级)054(功能) | 54 | DN125 | 1362 | 520 | E(等级)-44 | 3 |
HF-(等级)066(功能) | 66 | DN125 | 1362 | 520 | E(等级)-48 | |
HF-(等级)088(功能) | 88 | DN125 | 1530 | 545 | E(等级)-48 | 4 |
注: 1、本系列产品***大工作压力为16kgf/cm2 . 2、滤芯***高工作温度为66℃ (c级滤芯***高工作可达80℃). 3、等级:C.T.A.AA.H五个级别. 4、功能:可选择D-自动排水器 P-压差指示器 G-压差指示表 L-液面指示器. 5、更大流量过滤器请与公司联系. |
在压力不是7kgf/cm2 时,若确定***大流速,可从上表找出流速,然后乘以与过滤器进气口***小压力相应的修正系统。切勿根据管道尺寸选择过滤器;应根据流量和运行压力进行选择。To find the maximun flow at pressure other than 100psig[7kgf/cm2],multiply the flow (From table above) by the Correction Factor corresponding to the minimum pressure at the inlet of the notselect filerers by pipe size;use flow rate and operating pressure.Minimum Inlet Pressure Correction Factor | |||||||||||||||
进气口***小压力 Minimum Inlet Pressure |
2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 14 | 16 | 18 | 20 | 21 |
修正系数 Correction Factor |
0.38 | 0.50 | 0.62 | 0.75 | 0.87 | 1.00 | 1.12 | 1.24 | 1.37 | 1.62 | 1.86 | 2.11 | 2.36 | 2.61 | 2.71 |