我们的加工生产工序:
原材料从钢厂购买回来之后,通过合格供方评定属于此材质的材质单评定,然后我们将原材料经过质检科检验,合格后经过酸洗原料或者磷化处理,然后将原材料拔细(拔料机),磕断成加工的长度,然后进行冷镦成品试验,生产出来的产品都是由生产部安排,为技术工操作机器,然后将试验生产出来成品进行组批检测,质量合格,规格达标,将会全力投入正规生产,(有些成品通过需要可以开始热处理调质成要求的级别,每吨货需要4个小时的热处理,由班组自检负责,)经过处理之后的产品开始硬度全数分选检验,有相关的测验系数(硬度、抗拉强度、抗扭强度、伸长率、断后伸长率等等)之后就开始楔负载***后表面处理(发黑、镀锌、达克罗等)***后还需要组批测试八十套成品结果去***出报告,合格后我们才能出厂,***后包装附带产品合格证,材质检验报告,使用产品简介等以及客户需要的相同其他产品的详细使用资料我们都会为您附上!谢谢!
(interpretation,:)Our Processing procedures:Raw materials from steel mills to buy back,Asses***ent by qualified supplier of materials belonging to a single asses***ent of this material,Then we will test raw materials through quality control subjects,After passing through the pickling ingredients or phosphate treatment,Fine raw materials and then pull (pull feeding machine), and knock off as the length of processing,Cold heading and then finished testing the products produced by Production arrangements,For the skilled workers to operate the machines, then test the finished product produced by batch testing group,Quality standa***, specification compliance, will be fully put into formal production,(Some finished products needed to start the heat treatment by quenching into the level required for each ton cargo needs 4 hours of treatment, self-test by the team resp***ible,)After processing the product after the start sorting all the hardness test, a coefficient of correlation test(Hardness, tensile strength, torsional strength, elongation, elongation after fracture, etc.) began after the final surface treatment of the load wedge (black, galvanized, Dacromet, etc.)Need to set the final batch of test results of 80 sets of finished products to the Quality Supervision Bureau of the report, after passing the factory we can,al packaging with product certification, material test reports, such as use of the product profile and customer needs to use the same detailed information on other products, we will attach for you!
Thank you!