Specification:
Tran***ission Standa***
- DVB,MPEG-2
- LNB/Tuner input(DVB-S)
- Connector:2xF-type,IEC169-24(Loop Through)
- Input frequency:950-2150MHz
- Max Current:600mA max
- Supply Voltage:13V/18V
- DiSEqC:1.0 and 2.0
- RF Impedance:75ohm
Demodulator(DVB-S)
- QPSK
- Symbol rate:2-45Ms/s
- SCPC and MCPC capable
Video decoder
- MPEG-2 Main Profile@Main Level
- Data rates:up to 15Mbit/s
- Video formats:4:3(letterbox),4:3(Pan&Scan),16:09
Audio decoder
- MPEG-1 layer 1&2,MP3
- Dolby Digital
- Stereo,Mono,Dual channel,Joint stereo
System resources
- CPU:STi5518
- Processor:81MHz
- Graphic SDRAM:8MBytes
- Flash ROM:4MBytes
- Resolution:720X480,720X576 pixels
- OSD:256 colors
RF Modulator
- Output Channel:CH21-69 for modulator
- Output Signal:PAL B/G/I
- Input/Output Connector
- IEC169-2 male/female
- Preset Channel:43
TV SCART
- RGB,CVBS,Audio
VCR SCART
- CVBS,Audio
Audio Output
- Hi-Fi RCA(Cinch)connector
- Digital audio(SPDIF)connector option
Video Output
- RCA(Cinch)connector
0/12V Output
- Connects:12V to an external 0/12V switch
- external RS232 4pin output
Serial Data
- 9pin D-sub RS232C signal
- Baud rates:115200baud max
Remote Controller
- Type:RCH6638
- Operating distance:12 meters
- Batteries:2x1.5V AAA
Conditional Access System
- 1 ***art Card Reader
Network
- Dual Speed:10/100Mbps Ethernet
- Auto Negotiation:10/100,Full/Half Duplex
- Fully Integrated IEEE 802.3/802.3u-100Base-TX/10Base-T Physical Layer
Rear Panel Interfaces
- 1x DVB-S Tuner IN/OUT
- RF modulator IN/OUT
- 2x SCART for TV and VCR
- 2x RCA Audio(L/R,Cinch)
- 1x RCA Video(CVBS,Cinch)
- 1X SPDIF(OPTION)
- RS232C(9pin D-Sub)
- RJ-45 Connector
- Power Connector
General Data
- Operating Temperature:5C to 45C Storage temperature
- Supply Voltage:AC 90~265V,50/60Hz
- Power C***umption: 30W Max
- Dimension(WxDxH):340x256x68mm
- Weight:2.5kg