200立方制氧机，
工业制氧机
1，工作原理
TAO制氧机分离空气主要由两个填满分子筛的吸附塔组成，在常温条件下，将压缩空气经过过滤，除水干燥等净化处理后进入吸附塔，在吸附塔中空气中的氮气等被分子筛所吸附，而使氧气在气相中得到富集，从出口流出贮存在氧气缓冲罐中，而在另一塔已完成吸附的分子筛被迅速***，解析出已吸附的成分，两塔交替循环，即可得到纯度为≥90%的廉价的氧气。整个系统的阀门自动切换均由一台电脑自动控制。
PSA制氧机因为其显著的优点而被广大用户所青睐，它广泛地应用于冶金助燃，化工、环保、建材、轻工、***、水产养殖、生物技术、污水处理等领域。
相关搜索，工业制氧机，空分制氧机，小型制氧机，中小型制氧设备，氧气发生器，制氧设备，制氧装置，工业氧发生器，制氧系统，变压吸附制氧机，
2，技术指标
氧气产量：5-200Nm3/h 氧气纯度：93%--95%
氧气压力：0.2—0.3Mpa ***：--40℃（常压下）
3，备注，
本套系统氧气出口压力一般为0.2-0.3Mpa，通过增压灌装系统后压力为：0.5-16.0Mpa,详细技术环节，请拨打我公司24小时服务***咨询：86-0571-63425168 86-（0）13588398307，或者请我公司相关人员现场交流或者由销售内勤寄发详细相关资料。Email:air_separator@
1，Oxygen generator Principles:
PSA oxygen generator uses zeolite molecular sieve as sorbent, produces oxygen by making use of the PSA principle. Under certain pressure, zeolite molecular sieve has different oxygen/nitrogen adsorption capacity, i.e. much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity.
2,Technical target
1. Compressed Air Pressure:0.6—1.0Mpa 2. Yield: 3--200Nm3/h 3.Purity:90%--95%
4. Nitrogen outlet pressure:0.2—0.3Mpa 5. Dewpoint≤-45℃ 6，C***umption：Nm3/min
3,Note:
The set of the system outlet pressure of oxygen is generally 0.2-0.3Mpa, through the pressurization system after the filling pressure :0.5-16 .0 Mpa,.Detailed technical aspects, please call our company 24-hour service hotline :86-0571-63425168 86 - (0) 13,588,398,307, or asked me to the company related to the exchange of personnel on-site or by selling back-office to send more relevant information.
Email:air_separator@