TAB UP 1inch RJ45 connector with magnetics
with LEDs and 10/100base-tx transformer
without EMI finger
This is the drawing of rj45 connector U50(22)F4-130-P212-B12.
RJ45 connector Schematics
F4-130
ELECTRICAL SPECFICATI*** at 25°C:
1. Turn Ratio(&plu***n;5%): 1CT:1CT
2. Inductance(100KHz/0.1V@8mA): 350uH MIN
3. Insertion Loss(dB MAX): -1.0dB(1-100MHz)
4. Return Loss(dB MIN): -18dB(1-30MHz),-16dB(30-60MHz),-12dB(60-80MHz)
5. Cross talk(dB MIN):-30dB(1-100MHz)
6. CMR(dB MIN): -30dB(1-100MHz)
7. HI-POT: 1500Vrms/0.5mA/60Sec or 1650Vrms/0.5mA/2Sec
8. Operating Temperature: -40°C TO +85°C
9. RoHS compliance: YES
There is a example of RJ45 connector schematics.
- 10/100/1000 Mbps network devices, network signal coupling, Signal LED indicator;
- Signal LED, EMI selectable;
- Network filter circuit selectable;
- POE self-powered selectable; ork signal coupling, Signal LED indicator;
- Network filters electrical performance measure up to "IEEE802.3 and IEEE802.3ab" standard;
- The appearance and mechanical properties measure up to "FCC" standard;
6.1 In c***ideration of the maximum suppression of electromagnetic interference it reserve the ***allest interval on PCB;
6.2 OCL: 350uH Min;
6.3 Minimum separation of 1,500 Vrm;
6.4 350u H OCl, 8mA offset minimum;
6.5 Transformation ratio: Tx 1CT, 1CT Rx 1CT, 1CT; - RoHS compliance.