SL-080A离子风蛇
产品详情：
斯莱德SL-080A离子风蛇可消除难以接近或接触物体的静电或灰尘。可将蛇管随意变形使风嘴指向目标方位，无需用手操作可让离子气流直接吹向目标表面。气流控制器控制气流大小，安放灵活方便。离子针容易更换。需配用SL-007高压电源供应器一体使用（高压电源供应器需要另外购买）。可配用脚踏开关。
技术参数：
|
Operating Voltage(操作电压) |
4.6KV(SL-007) |
|
Current C***umption(消耗电流) |
350uA |
|
Operating Temperature(操作温度) |
0-50℃ |
|
Air Volume(重量) |
1.0kg |
|
Length of Hose(蛇形管长度) |
33cm |
|
Air velocity(压缩空气压力) |
5~70psi |
|
Air Flow(压缩空气流量) |
0.8SCFM at 10PSI 5.5SCFM at 50PSI 11.5SCFM at 100PSI |
|
HV cable length(高压电线长度) |
2meters |
|
Operating air velocity(工作气流速度) |
10m/sec |
测试结果：
|
Discharge Time(5000V to 500v at 15cm 除静电时间（5000V 至500V 距离15cm） |
＜2seconds |
备注：1、测试数据以ME268A静电测试仪结果为准。
2、测试环境温度为：≤25℃，环境温度为：≤75RH%。
3、测试的数据会因测试时的环境空气温湿度而有所变化。
SL-080A Ionizing Air Snake
Product Details:
DR. SCHNEIDER PC SL-080AIonizing Air Snake can eliminate electrostatic charges or dust from the inaccessible or untouchable objects. Its coil pipes can be twisted flexibly to make the nozzle target at the object, where ionized stream can be directly blown onto the object surface without manual operation. It c***ists of Air controller to control the size of the air.The product can be placed anywhere flexibly and the ion emitters can be easily replaced. It must be used together with SL-007 High-Voltage Power Supply (to be ordered separately). Footswitch is optional.
Technical parameters:
|
Operating Voltage |
4.6KV(SL-007) |
|
Current C***umption |
350uA |
|
Operating Temperature |
0-50℃ |
|
Air Volume |
1.0kg |
|
Length of Hose |
33cm |
|
Air velocity |
5~70psi |
|
Air Flow |
0.8SCFM at 10PSI 5.5SCFM at 50PSI 11.5SCFM at 100PSI |
|
HV cable length |
2meters |
|
Operating air velocity |
10m/sec |
Test results:
|
Discharge Time(5000V to 500v at 15cm |
＜2seconds |
Remarks:
1. The test data are subject to the test results of ME268A Electrostatic Tester.
2. The ambient temperature for the test is ≤25℃, while the ambient humidity is ≤75RH%.
3. The test data vary with the ambient temperature and humidity during testing.