供应斯莱德SL-203B一体式离子风蛇

SL-203B一体式离子风蛇

产品详情：

斯莱德SL-203B一体式离子风蛇可产生大量的带有正负电荷的气流，可以将物体上所带的电荷中和掉。当物体表面所带电荷为负电荷时，它会吸收气流中的正电荷，当物体表面所带电荷为正电荷时，它会吸收气流中的负电荷，从而使物体表面上的静电被中和，达到消除静电的目的。高速的压缩气还可将物体上的顽固积尘吹走。

SL- 203B一体式离子风蛇的电离器件在高压发生装置产生的高电压低电流作用下，形成一个稳定的高压电场，电离空气形成离子体，由气流带出到达物体表面,达到消除静电的目的.

产品特点:

• SL-203B风蛇是通过光电开关来控制气流，减少不必要的压缩气浪费和噪音。
• 快速消除静电，更容易清洁细小敏感的部件和材料。

3、移动安装方便，离子风蛇有良好的接地保护功能。

技术参数:

输入电压220V/50Hz或110V/60Hz 

消耗电流            200uA

功率                40W

环境使用温度－10℃～＋50℃     

重量约0.5kg（带线）   

高压电线长度        3M 

压缩空气压力        0.3Mpa～0.8Mpa     

气流速度3～10m/S 

臭氧量                 0.03PPM 

测试结果：

测   试   条件

测试电压:1KV～100V  环境温度:22℃湿度:≤60℅气压:0.6Mpa

距   离150mm

中和时间正0.8S

负0.9S

残余电压

正≤&plu***n;35V

负≤&plu***n;35V

1．测试距离单位为毫米，中和时间单位为秒。

2．测试数据以用ME268A静电测试仪测试结果为准。

3．测试的数据会因测试时的环境空气温度而有所变化。

SL-203B One-piece Ionizing Air Snake

Product Details:

SL-203B One-piece Ionizing Air Snakecan produce a large number of positive and negative Ionizing Air, and neutralize the surface of the object with static. When the object surface is negatively charged, it will absorb positive charges from air flow; when positively charged, it will absorb negative charges from air flow. In this way, the electrostatic charges will be neutralized and thus eliminated from the object surface. The high-speed compressed air can also blow away the stubborn dust from the object.

Under the effect of high voltage and low current produced by the high-voltage generator, the ionization element of SL-203B One-piece Ionizing Air Snake will form a steady high-voltage electric field, where air will be ionized to i*** and then be carried by air flow onto the object surface, and to eliminate the purpose of static electricity.

Product Features:
1、SL-203BIonizing Air Snake uses photoelectric switch to control air flow, thus reduce unnecessary compressed air wasting and noise.
2、It can quickly neutralize electrostatic charges and more easily clean tiny and sensitive parts and materials.
3、Ionizing Air Snake is easy to move and install, with good grounding protection.
 

Technical parameters:

Test results:

Remarks:
1. The test data are subject to the test results of ME268A Electrostatic Tester.
2. The ambient temperature for the test is ≤25℃, while the ambient humidity is ≤75RH%.
3. The test data vary with the ambient temperature and humidity during testing.