日本KETT品牌LH-200J型高频涡流式涂层检测仪
特点：
本仪器采用了涡流测厚方法，可无损的测量非磁性金属基体（如铜、铝、锌、锡等）上的非导电覆层的厚度（如珐琅、相交、油漆、塑料等）。
内置打印机，可打印数据，有四个统计功能。
本仪器采用了涡流测厚方法，可无损的测量非磁性金属基体（如铜、铝、锌、锡等）上的非导电覆层的厚度（如珐琅、相交、油漆、塑料等）。
内置打印机，可打印数据，有四个统计功能。
测定方法 高频涡流式
测定对象 非磁性金属上绝缘层
测定范围 0～800um或0～32.0mils
测定精度 <50um&plu***n;1um >50um&plu***n;2%
分辨率 <100um 0.1um >100um 1um
界限设定 可设定上/下限数值
测试单位 公/英制互换
显示方式 LCD数显
操作面板 密封防水按键
附属品 铝基体/校正标准片/电池/皮套/说明书
电源 DV3V 主机5#碱性电池×6个 打印机5#碱性电池×4个
体积 80(W)×80(D)×30(H)
重量 1100g
测定对象 非磁性金属上绝缘层
测定范围 0～800um或0～32.0mils
测定精度 <50um&plu***n;1um >50um&plu***n;2%
分辨率 <100um 0.1um >100um 1um
界限设定 可设定上/下限数值
测试单位 公/英制互换
显示方式 LCD数显
操作面板 密封防水按键
附属品 铝基体/校正标准片/电池/皮套/说明书
电源 DV3V 主机5#碱性电池×6个 打印机5#碱性电池×4个
体积 80(W)×80(D)×30(H)
重量 1100g
The LH-200J Eddy-current Coating Thickness Tester is a compact coating thickness tester complete with a built-in printer. With the LH-200J, you can quickly and accurately measure objects without worrying about damaging the insulating coating on non-ferrous substrates and printout your results right on the spot. This unit is also equipped with handy features such as statistical calculati***, calibration, memory, and limit setup.
Specificati*** LH-200J
Measurement Method Eddy-current
Applicati*** Insulating coatings on non-ferrous substrates
Measurement Range 0-800µm or 32.00mils
Measurement Precision Under 50µm: &plu***n;1µm, 50µm or greater: &plu***n;3%
Resolution 0.1µm (less than 100µm), 1.0µm (100µm or greater)
Statistical Functi*** Number of measurements, ***erage value, Standard deviation, Maximum value, Minimum value, Block numbers
Probe One-point contact fixed pressure (LHP-J)
Display Format Digital(LCD, ***allest displayed unit 0.1µm)
Output RS-232C interface(tran***ission speed-2400bps)
Power Source AC100V (50/60Hz) or 1.5 ("AA" size Alkaline batteries) x 6 (main unit), Printer ("AA" size Alkaline batteries) x 4
Dimensi*** & Weight 120(W)X250(D)X55(H)mm, Net 1.0kg
Shipment 2.5kg
Accessories Calibration plate, Batteries (1.5V, "AA" size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Opti*** Data Management Software "McW***e Series" and "MultiProp"
(McW***e Series and MultiProp are products of CEC Co.)
Specificati*** LH-200J
Measurement Method Eddy-current
Applicati*** Insulating coatings on non-ferrous substrates
Measurement Range 0-800µm or 32.00mils
Measurement Precision Under 50µm: &plu***n;1µm, 50µm or greater: &plu***n;3%
Resolution 0.1µm (less than 100µm), 1.0µm (100µm or greater)
Statistical Functi*** Number of measurements, ***erage value, Standard deviation, Maximum value, Minimum value, Block numbers
Probe One-point contact fixed pressure (LHP-J)
Display Format Digital(LCD, ***allest displayed unit 0.1µm)
Output RS-232C interface(tran***ission speed-2400bps)
Power Source AC100V (50/60Hz) or 1.5 ("AA" size Alkaline batteries) x 6 (main unit), Printer ("AA" size Alkaline batteries) x 4
Dimensi*** & Weight 120(W)X250(D)X55(H)mm, Net 1.0kg
Shipment 2.5kg
Accessories Calibration plate, Batteries (1.5V, "AA" size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Opti*** Data Management Software "McW***e Series" and "MultiProp"
(McW***e Series and MultiProp are products of CEC Co.)