日本KETT品牌LE - 200J统计印表型电磁式涂层检测仪
技术参数：
型号 LE - 200J
测定方法 电磁式
测定对象 磁性金属上之非磁性被膜
适用底材 钢、铁
测量被膜 油漆、粉液体烤漆、树脂、氧化膜锌、热浸镀锌、机械镀锌、铬、锡铜、铝、砝琅、薄膜、皮膜处理等
测定范围 0 ~ 1500 μm 或 60.00 mils
测定精度 15 μm 以下&plu***n; 0.3 μm
15 μm 以上 &plu***n; 2 %
解析度 100μm以下0.1μm；100μm以上：1μm
***小测定面积 3 * 3mm
显示方式 16位数LCD数字显示
电源AC110V/60Hz或主机3电*6，印表机单3电池*4
电池寿命连续使用60小时,并具节电功能,15分钟未使用自动关机
资料记忆数 1500点
统计功能可针对个别区块平均，亦可针对记忆资料总平均
统计显示测定次数，平均值、***大值、***小值、标准差值
校正记忆功能4组，任何时间开机后不需再重新校正
界限值功能可任意设定上、下限判定功能
操作面板 18键密封按键
尺寸、重量 W120*D250*H55mm、约1kg
印表机24character内藏感热式印表机，自动统计记录，纸宽58mm
测定方式单点测试；连续扫描测试(可测试膜厚分布变化)
测定单位 公、英制可切换式μ>m/mils
传输功能具RS-232C介面，传输速度2400bps
标准附属品校正用素材、标准校正片、测头、曲面固定器、单3电池
统计印表型电磁式涂层测厚仪 型号:LE - 200J
※ 200系列涂层测厚仪内建印表机，测定结果可直接输出
※ 200系列涂层测厚仪功能含盖330系列涂层测厚仪的各项特色
※ 特殊电子回路设计，测定稳定性及精度高于其它系列机型，为涂层测厚仪的***机型
※ AC及DC电源皆可使用，现场及实验室皆方便量测
※ 200系列涂层测厚仪内建印表机，测定结果可直接输出
※ 200系列涂层测厚仪功能含盖330系列涂层测厚仪的各项特色
※ 特殊电子回路设计，测定稳定性及精度高于其它系列机型，为涂层测厚仪的***机型
※ AC及DC电源皆可使用，现场及实验室皆方便量测
The LE-200J Electromagnetic Coating Thickness Tester is a portable coating thickness tester with a built-in printer. This unit can accurately and quickly measures many items such as magnetic plating (electrolyzed nickel plating not included), coating, painting, and lining without injuring or damaging the item. Furthermore, you can print out the measurement results on-site with the internal printer.
Specificati*** LE-200J
Measurement Method Electromagnetic induction
Applicati*** Non-magnetic coating on iron and steel (ferrous) substrates
Measurement Range 0-1500µm or 60.00mils
Measurement Precision Under 15µm: &plu***n;0.3µm, 15µm or greater: &plu***n;2%
Resolution 0.1µm (less than 100µm), 1.0µm (100µm or greater)
Statistical Functi*** Number of measurements, ***erage value, Standard deviation, Maximum value, Minimum value, Block numbers
Probe One-point contact fixed pressure (LEP-J)
Display Format Digital(LCD, ***allest displayed unit 0.1µm)
Output RS-232C interface(tran***ission speed-2400bps)
Power Source AC100V (50/60Hz) or 1.5 ("AA" size Alkaline batteries) x 6 (main unit), Printer ("AA" size Alkaline batteries) x 4
Dimensi*** & Weight 120(W)X250(D)X55(H)mm, Net 1.0kg
Accessories Calibration plate, Iron substrate, Batteries (1.5V, "AA" size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Opti*** L Probe LEP-21L(Probe for use on the inside surface of pipes),Data Management Software "McW***e Series" and "MultiProp"
(McW***e Series and MultiProp are products of CEC Co.)
Specificati*** LE-200J
Measurement Method Electromagnetic induction
Applicati*** Non-magnetic coating on iron and steel (ferrous) substrates
Measurement Range 0-1500µm or 60.00mils
Measurement Precision Under 15µm: &plu***n;0.3µm, 15µm or greater: &plu***n;2%
Resolution 0.1µm (less than 100µm), 1.0µm (100µm or greater)
Statistical Functi*** Number of measurements, ***erage value, Standard deviation, Maximum value, Minimum value, Block numbers
Probe One-point contact fixed pressure (LEP-J)
Display Format Digital(LCD, ***allest displayed unit 0.1µm)
Output RS-232C interface(tran***ission speed-2400bps)
Power Source AC100V (50/60Hz) or 1.5 ("AA" size Alkaline batteries) x 6 (main unit), Printer ("AA" size Alkaline batteries) x 4
Dimensi*** & Weight 120(W)X250(D)X55(H)mm, Net 1.0kg
Accessories Calibration plate, Iron substrate, Batteries (1.5V, "AA" size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case
Opti*** L Probe LEP-21L(Probe for use on the inside surface of pipes),Data Management Software "McW***e Series" and "MultiProp"
(McW***e Series and MultiProp are products of CEC Co.)