Item |
Description |
Product |
Wireless 802.11n Access Point |
SoC + RF |
Ralink RT3050 |
Flash |
4 MB |
RAM |
32MB |
Antenna |
Non-detachable 3dBi Antenna x 1 |
Wireless Features |
Support IEEE 802.11g, 802.11b and 802.11n draft 2.0 Wireless Access Point |
Superior wireless coverage and high performance, up to 150Mbps for wireless data rates |
|
Support WDS, AP, AP Client mode |
|
Maximum coverage distance |
100 mindoors;300 m outdoors |
Modulation Types Supported |
OFDM: BPSK, QPSK, 16QAM, 64QAM, Proprietary MIMO modulation (11g) |
DSSS: DBPSK, DQPSK, CCK(11b) |
|
Data Rates Supported |
IEEE 802.11b: 1, 2, 5.5 and 11 Mbps IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps IEEE 802.11n(draft 3.0): up to 150Mbps |
Quality of Service (QoS) |
IEEE 802.11e QoS |
Wi-Fi alliance WMM (Wi-Fi Multimedia Enhancement) support |
|
Ha***are-based priority queues |
|
Management Features |
Firmware upgrade via HTTP |
WAN and LAN side connection statistics |
|
Configuration of static routes and routing table |
|
Configuration of NAT / NAPT |
|
Selection of bridge or router mode |
|
PPP user ID and password |
|
Physical Interfaces |
4 x RJ-45 10/100Mbps LAN Ports 1 x RJ-45 WAN Port 1 x power jack 2 x detachable antennas |
Router Features |
DHCP server and client |
NAPT (Network Address and Port Translation) |
|
NAT (Network Address Translation) |
|
ICMP (Internet Control Message Protocol) |
|
IGMP (Internet Group Management Protocol) |
|
DDNS (Dynamic Domain Name Service) |
|
Security Features |
Password protected configuration access |
User authentication (PAP / CHAP) with PPP |
|
Support 64/128-Bit WEP encryption, WPA-PSK, WPA2-PSK, WPS and 802.1x |
|
Ethernet Features |
Compliant with IEEE 802.3 and 802.3u 10/100 Mbps |
All Ethernet ports support auto-crossover (MDI/MDI-X) |
|
Power |
12VDC, 0.5A Single Range Switching Power Adapter |
temperature |
0℃to 40℃(operating) –20℃ to +70℃(storage) |
humidity |
10% to 90% non-condensing (operating) 5% to 95% non-condensing (storage) |