Habasit F-5ENWT 09

HabaFLOW Product Data Sheet F-5ENWT 09

Product Group:	TPU food conveyor and processing belts
Product Sub-Group:	Food conveyor belts
Main Industry Segments:	Bakery (biscuit/cookie); Bakery (bread); Cheese; Chocolate/confectionery; Fish processing; Food unwrapped/open; Meat; Poultry; Vegetables
Belt Applications:	Cooling (line) belt; Discharging belt; General conveying belt; Infeed belt; Inspection/control belt; Metering/singulation belt; Packaging belt; Processing belt; Transfer belt; Weighing belt
Special Features:	Abrasion resistant; Easy cleanability; Smooth and pore-free belt surface
Mode of Use/Conveyance:	Horizontal; Inclined

	Conveying Side (Material):	Thermoplastic polyurethane (TPU)
	Conveying Side (Surface):	Smooth
	Conveying Side (Property):	Non-adhesive
	Conveying Side (Color):	White
	Traction Layer (Material):	Polyester (PET) fabric
	Number of Fabrics:	2
	Running Side/Pulley Side (Material):	Polyester (PET) fabric
	Running Side/Pulley Side (Surface):	Impregnated fabric
	Running Side/Pulley Side (Color):	White

Slider bed suitable:	Yes
Carrying rollers suitable:	Yes
Troughed installation suitable:	No
Power turns, curved installations:	No
Nosebar suitable:	Yes
Low noise applications:	No
Antistatically equipped:	Yes
Metal detector suitable:	Yes
Flammability:	No specific flammability prevention property
Food suitability FDA:	Yes - acc. to 21CFR parts 170 - 199. Contact your Habasit representative for detailed information.
Food suitability USDA:	No use intended
Food suitability EU:	Yes - acc. to Regulation (EC) No. 1935/2004 and Directive 2002/72/EC as amended. Contact your Habasit representative for detailed information.

Thickness:	1.8	mm	0.07	in.
Mass of belt (belt weight):	1.9	kg/m2	0.39	lbs./sq.ft
Nosebar Radius (minimum):	7	mm	0.28	in.
Pulley diameter (minimum):	25	mm	1	in.
Pulley diameter minimum with counter flection:	40	mm	1.6	in.
Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181):	8	N/mm	46	lbs./in.
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181):	6	N/mm	34	lbs./in.
Admissible tensile force per unit of width:	18	N/mm	103	lbs./in.
Operating temperature admissible (continuous):	Min -20 Max 80	°C °C	Min -4 Max 176	°F °F
Coefficient of friction of driving pulley of steel:	0.15	[-]	0.15	[-]
Coefficient of friction of driving pulley with friction cover:	0.40	[-]	0.4	[-]
Coefficient of friction on slider bed of pickled steel sheet:	0.20	[-]	0.2	[-]
Coefficient of friction on slider bed of stainless steel sheet:	0.15	[-]	0.15	[-]
Seamless manufacturing width:	4000	mm	157	in.
On request other seamless manufacturing width:	NA	mm	NA	in.

Chemical Resistance Class:	6 (for details, see separate overview)
Remark:	These indications are not guarantees of properties.
Resistant to:	All solids; Dirt; Dryness; Fats; Humidity; Organic oils; Putrefaction; Resins; Vegetable oils
Limited resistance to:	None
Not resistant to:	Caustic Soda > 10%; Hydrochloric acid > 20%; Sodium hypochlorite/javelle water; Sulphuric acid > 50%

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.

Do not go below initial elongation (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load.

For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.

Master Joining Method:	Flexproof 20 x 80
Remarks:	Master joining method for standard applications
Link to Joining Data Sheet

Alternative Joining Method:	Flexproof 10 x 80
Remarks:	Master joining method for nosebar / high stress applications
Link to Joining Data Sheet

Alternative Joining Method:	Thermofix
Remarks:	Optional joining method

If High Frequency (HF) system is used check belt heating; Not suitable for wet operations combined with increased temperatures and with extreme greasy and oily conditions.; Use cleaning agent as prescribed by the machine or cleaning agent manufacturer.; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment.

*	No calculation Value
2)	Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC
3)	CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal.
8)	Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited
BfR	German federal institute for risk assessment (Bundesinstitut fuer Risikobewertung)
EEC	European Economic Community
EU	European Union (Directive 2002/72/EC)
FDA	Food and Drug Administration
NA	Not available
NAP	Not applicable
USDA	United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.)
**	Nosebar applications: wood/board/panel industry (forming lines) - belt length >20 m - no multiple nosebars.

 瑞士Habasit总公司成立于1946年，为专业化学合成传动带及输送带制造商。Habasit的技术研发小组，除了在公司既 有的产品在线持续研究之外,更以不断创新的概念在市场上推陈出新。Habasit的专业形象及服务质量，长久以来 受到广大客户的认同，并在业界取得全球领先的地位。 瑞士Habasit集团目前于全球共有19个分支机构，与一百多个销售据点，以持续提供客户最高质量的产品、最专业的技术、与最好的服务。    

瑞士Habasit 的生产中心分布于瑞士总部、意大利、美国、及印度．提供的产品有传动皮带、输送皮带、圆带、模块式网带、加工工具、锭带、无接缝皮带、不织布输送带、耐高温带、印花导带、PU齿形带、及各式特殊带。 提供客户全方位的专业服务是Habasit 长久以来坚持的理念，因此，我们发展了一套应用行业发展策略(SBU-strategic business unit)，针对各个行业领域，提供Habasit 的专业建议，以期与客户共同成长。                

瑞士habasit提供的服务项目：
皮带种类：整卷皮带、接圆皮带、或已预留接头皮带
接头方式：齿接、磨接、快速对接、与钉扣接圆
特殊加工：皮带打孔、导条、挡板、包边、裙边、现场接着服务、及其它特殊加工需求拥有制造宽度可达四米之皮带压延机，更可满足客户的特殊需求。