|
HabaDRIVE Product Data Sheet A-2LT |
|
Product Designation
 |
|
| Product Group: | Polyamide power tran***ission belts |
| Product Sub-Group: | Leather flat belts |
| Main Industry Segments: | Various industries |
| Belt Applicati***: | Driving belt; Power tran***ission belt |
| Special Features: | Wear resistance |
| Mode of Use/Conveyance: | Power tran***ission |
Product Design (enlarged)
Product C***truction/Design
|
|
|
|
|
|
Friction cover/Pulley side (Material): |
Chrome leather |
|
|
Friction cover/Pulley side (Surface structure): |
Leather structure |
|
|
Friction cover/Pulley side (Color): |
Light gray |
|
|
Traction Layer (Material): |
Polyamide (PA) |
|
|
Reverse cover (Material): |
Polyamide (PA) fabric |
|
|
Reverse cover (Surface structure): |
Rough structure |
|
|
Reverse cover (Color): |
Green |
Product Characteristics
|
|
|
| Drive determination: |
One-sided power tran***ission |
| Antistatically equipped: |
No |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
2.0 |
mm |
0.08 |
in. |
| Mass of belt (belt weight): |
2.1 |
kg/m2 |
0.43 |
lbs./sq.ft |
| Pulley diameter (minimum): |
60 |
mm |
2.4 |
in. |
| Pulley diameter minimum with counter flection: |
60 |
mm |
2.4 |
in. |
| Tensile force for 1% elongation (k1% after running in) per unit of width (Habasit standard SOP3-013): |
3.8 |
N/mm |
22 |
lbs./in. |
| Nominal peripheral force per unit of width: |
14.5 |
N/mm |
83 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -20 Max 80 |
°C °C |
Min -4 Max 176 |
°F °F |
| Seamless manufacturing width: |
450 |
mm |
18 |
in. |
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 1 (for details, see separate overview) |
| Remark: |
These indicati*** are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Fats; Oils; Putrefaction |
| Limited resistance to: |
Benzines; Humidity |
| Not resistant to: |
Caustic Soda > 10%; Hydrochloric acid > 20%; Sulphuric acid > 20% |
Calculati***
|
|
|
With power tran***ission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to h***e belt drives calculated by Habasit representatives. |
Installation and Handling Instructi***
|
|
|
Observe the indicati*** of the machine handbook from the machine manufacturers. |
Storage
|
|
|
For details c***ult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
|
| Master Joining Method: |
Thermofix |
| Remarks: |
Master joining method for standard applicati*** |
| Link to Joining Data Sheet |
Limitati***
|
|
|
This product has not been tested according to ATEX standa*** (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditi***: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
|
| * |
No calculation Value |
| 3) |
CLA: Coordination of the centre line-***erage value Ra (in the US also Arithmetical ***erage (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| EEC |
European Economic Community |
| NA |
Not ***ailable |
| NAP |
Not applicable |
Quality System (certified)
|
|
|
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide c***istently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.
Certified Manufacturing Sites : Habasit AG, Switzerland : Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987. Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992 Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002. Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001. Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since 2006. Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since 2006. |
Product Liability, Applicati*** C***iderati***
瑞士Habasit***是***大的工业皮带制造商，***工业皮带的***者。总公司成立于1946年，为***化学合成传动带及输送带制造商。Habasit的技术研发小组，除了在公司既 有的产品在线持续研究之外,更以不断创新的概念在市场上推陈出新。Habasit的***形象及服务质量，长久以来 受到广大客户的认同，并在业界取得******的地位。 瑞士Habasit集团目前于***共有19个分支机构，与一百多个销售据点，以持续提供客户***高质量的产品、******的技术、与***好的服务。
瑞士Habasit 的生产中心分布于瑞士总部、意大利、美国、及印度．提供的产品有传动皮带、输送皮带、圆带、模块式网带、加工工具、锭带、无接缝皮带、不织布输送带、耐高温带、印花导带、PU齿形带、及各式特殊带。 提供客户***的***服务是Habasit 长久以来坚持的理念，因此，我们发展了一套应用行业发展策略(SBU-strategic business unit)，针对各个行业领域，提供Habasit 的***建议，以期与客户共同成长。
瑞士habasit提供的服务项目：
皮带种类：整卷皮带、接圆皮带、或已预留接头皮带
接头方式：齿接、磨接、快速对接、与钉扣接圆
特殊加工：皮带打孔、导条、挡板、包边、裙边、现场接着服务、及其它特殊加工需求拥有制造宽度可达四米之皮带压延机，更可满足客户的特殊需求。
主要产品和服务：Habasit 哈伯斯特 Habasit皮带.龙带.印花导带.输送带.同步带.圆带.多沟带.牵引带.交叉铺网带.模组网带 .皮带加工设备及皮带现场接驳服务
Habasit旗下品牌：Fixol® Habasit Flexfold® Habilene®
HabaGUARD® Habasit HyGUARD® Hamid®
Habasit® HabasitLINK® Polycord®
Habasit Cleanline® Habidur®
大陆地区
技术选型电话：13391350298
销 售 热 线：13774455550 程先生
电 话： 86-021-60481210
传 真： 86-021-59774515
联系人：程亮（技术部）13774455550
E- mail: habasit@
http://www.habasit-
http://
http://
http://www.habasit-belts.
http://www.habasit.
地址：上海市青浦区新凤中路1742号
|
|
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales spe***t, the selection and application of Habasit products, including the related area of product safety, are the resp***ibility of the customer. All indicati*** / information are recommendati*** and believed to be reliable, but no representati***, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applicati***. The data provided herein are based on laboratory work with ***all-scale test equipment, running at standard conditi***, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modificati*** and changes within a short time without prior notice. BECAUSE CONDITI*** OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, C***EQUENTIAL DAMAGES, AND FURTHER-REACHING C***EQUENCES. |