|
Product Data Sheet MNI-8P |
|
Product Designation
 |
|
| Product Group: | Hamid machine tapes |
| Product Sub-Group: | - |
| Main Industry Segments: | Folding; Paper converting; Paper manufacturing and processing; Paper printing and finishing |
| Belt Applications: | Folder belt; Machine tape; Paper handling belt |
| Special Features: | Abrasion resistant; Constant and gentle positive grip; Dimensionally stable; Flexibility in all directions; Non-marking |
| Mode of Use/Conveyance: | Declined; Horizontal; Inclined; Vertical |
Product Design (enlarged)
Product Construction/Design
|
|
|
|
|
|
Conveying Side (Material): |
Polyamide (PA) fabric |
|
|
Conveying Side (Surface): |
Fabric |
|
|
Conveying Side (Property): |
Non-adhesive |
|
|
Conveying Side (Color): |
Light gray |
|
|
Traction Layer (Material): |
Polyamide (PA) fabric / Hamid foil |
|
|
Number of Fabrics: |
2 |
|
|
Running Side/Pulley Side (Material): |
Polyurethane cross-linked (PUR) |
|
|
Running Side/Pulley Side (Surface): |
Impregnated fabric |
|
|
Running Side/Pulley Side Property: |
Non-adhesive |
|
|
Running Side/Pulley Side (Color): |
Black |
Product Characteristics
|
|
|
| Slider bed suitable: |
Yes (Only small belt load) |
| Carrying rollers suitable: |
Yes |
| Troughed installation suitable: |
No |
| Antistatically equipped: |
Yes |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
|
| Thickness: |
1.8 |
mm |
0.07 |
in. |
| Mass of belt (belt weight): |
1.65 |
kg/m2 |
0.34 |
lbs./sq.ft |
| Pulley diameter minimum with counter flection: |
25 |
mm |
1 |
in. |
| Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181): |
8.5 |
N/mm |
49 |
lbs./in. |
| Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): |
3.6 |
N/mm |
21 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -20 Max 66 |
°C °C |
Min -4 Max 151 |
°F °F |
| Coefficient of friction of driving pulley of steel: |
0.25 |
[-] |
0.25 |
[-] |
| Seamless manufacturing width: |
1200 |
mm |
47 |
in. |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
|
| Chemical Resistance Class: | 2 (for details, see separate overview) |
| Remark: |
These indications are not guarantees of properties. |
| Resistant to: |
All solids; Dryness; Fats; Gasoline; Humidity; Oils; Rotting; Soiling |
| Limited resistance to: |
NA |
| Not resistant to: |
Caustic Soda > 10%; Hydrochloric acid > 20%; Sulphuric acid > 20% |
Calculations
|
|
|
For most applications calculation is not required. Should you still need a calculation: please ask Habasit. |
Installation and Handling Instructions
|
|
|
Do not go below initial elongation (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load. |
Storage
|
|
|
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
|
| Master Joining Method: |
Flexproof 8 x 30 |
| Remarks: |
Master joining method for standard applications |
| Link to Joining Data Sheet |
Limitations
|
|
|
dmin = 25 mm in case belt speed is < 5 m/sec - dmin = 30 mm in case belt speed is < 12 m/sec or belt is specified by machine manufacturer - dmin = 40 mm in case belt speed is > 12m/sec. Info for machine manufacturers: dmin depends on belt path. Please contact Habasit for new machine designs.; Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
|
| * |
No calculation Value |
| 2) |
Product containing different coating materials such as elastomer‚ natural fibers‚ silicones‚ etc.‚ are not subject to the directive 2002/72/EC |
| 3) |
CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| BfR |
German federal institute for risk assessment (Bundesinstitut fuer Risikobewertung) |
| EEC |
European Economic Community |
| EU |
European Union (Directive 2002/72/EC) |
| FDA |
Food and Drug Administration |
| NA |
Not available |
| NAP |
Not applicable |
| USDA |
United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.) |
Quality System (certified)
|
|
|
Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide consistently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.
Certified Manufacturing Sites : Habasit AG, Switzerland : Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987. Habasit UK : Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992 Habasit Italiana, Vigliano : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002. Plastomeccanica : Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001. Habasit America Buffalo, New York : Registered by ISOQAR, United Kingdom, since 2006. Habasit America Middletown, Connecticut : Registered by ISOQAR, United Kingdom, since 2006. |
Product Liability, Applications Considerations
|
|
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer. All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice. BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES.
瑞士Habasit总公司成立于1946年，为专业化学合成传动带及输送带制造商。Habasit的技术研发小组，除了在公司既 有的产品在线持续研究之外,更以不断创新的概念在市场上推陈出新。Habasit的专业形象及服务质量，长久以来 受到广大客户的认同，并在业界取得全球领先的地位。 瑞士Habasit集团目前于全球共有19个分支机构，与一百多个销售据点，以持续提供客户最高质量的产品、最专业的技术、与最好的服务。
瑞士Habasit 的生产中心分布于瑞士总部、意大利、美国、及印度．提供的产品有传动皮带、输送皮带、圆带、模块式网带、加工工具、锭带、无接缝皮带、不织布输送带、耐高温带、印花导带、PU齿形带、及各式特殊带。 提供客户全方位的专业服务是Habasit 长久以来坚持的理念，因此，我们发展了一套应用行业发展策略(SBU-strategic business unit)，针对各个行业领域，提供Habasit 的专业建议，以期与客户共同成长。
瑞士habasit提供的服务项目： |
