| 材质：硅酸铝 | 产地：东营 | 产品类别：窑炉工业窑炉用保温材料 |
| 产品种类：保温板 | 等级：1 | 低温弯折≤：. |
| 断裂伸长率：. | 抗弯强度：. | 抗压强度：0.5 |
| 品牌：祥雨 | 使用温度：950-1200 | 芯材：硅酸铝纤维 |
| 形态：纤维状 | 形状：片状 | 应用范围：耐火保温隔热 |
| 规格：600*400*20-50mm |
产品说明:
陶瓷纤维板采用散棉加无机粘合剂用湿法真空吸滤加压成形,并按不同型号经过高温锻烧处
理,该产品同时具备低容重高强度的优良特性,,是一种多用途产品，可应用于炉衬热面抗火焰和
高温气流直接冲击。
二、特点:
高温稳定
低导热率
低热容
抗热震
抗侵蚀
易加工和切割性能
精准的厚度与尺寸
良好的抗火焰及气流冲刷
安装使用方便
三、产品应用:
可应用于同时要求坚韧，自承重及隔热的领域，它具有良好的抗机械***性能。
领域包括：推板窑、钢包炉、钟罩窑、隧道窑、辊道窑、熔铝炉、热处理炉等绝热内
衬和背衬；高温挡火板;窑车隔热；各种高温工业窑炉隔热。
四、理化数据
产品规格（mm）： 标准 600×400×20～50 900*600*20-50 | |||||||||||||||||||||||||||||||||||||||||||||||||||
I. Product Description:
Aluminosilicate Fiberboard increase the use of casual cotton inorganic adhesive wet filter vacuum pressure forming, and different models through high-temperature calcination Department
The rationale for the product at the same time with high-strength low-density fine features, is a multi-purpose products, lining can be applied to the flame and heat resistant surface
A direct impact on high-temperature airflow.
Second, characteristics:
High temperature stability
Low thermal conductivity
Low heat capacity
Thermal shock resistance
Anti-erosion
Easy processing and cutting performance
Precise thickness and size
Good anti-flame and air scour
The installation of easy-to-use
Third, product applicati***:
Requirements can be applied at the same time tough, since the load-bearing areas and thermal insulation, it has a good performance against mechanical damage.
Areas include: push board kiln, ladle furnace, Bell kiln, tunnel kiln, roller kiln, aluminum melting furnace, heat treatment furnace, such as insulation in
Lining and backing; high-temperature thermal block plate; kiln car insulation; a variety of high temperature industrial furnace insulation.
Fourth, physical and chemical data
Model
STD-1000
HP-1260
HA-1420
HG-1600
Classification temperature (o C)
1000
1260
1420
1600
Bulk density (kg / m 3)
160-250
160-250
160-250
160-250
Re-burned linear shrinkage (%)
<1.4 (800oC
× 24hr)
<1.3 (1000oC
× 24hr)
<1.5 (1150oC
× 24hr)
<2 (1500oC
× 24hr)
Of
Science
Group
Into
%
Al 2 O 3
37
42
30
65
SiO 2 + Al 2 O 3
> 96
99
88
> 99
Fe 2 O 3
<1.0
0.2
0.2
--
ZrO 2
--
--
8
--
Product specificati*** (mm): the standard 600 × 400 × 20 ~ 50 900 * 600 × 20 ~ 50
Aluminosilicate Fiberboard increase the use of casual cotton inorganic adhesive wet filter vacuum pressure forming, and different models through high-temperature calcination Department
The rationale for the product at the same time with high-strength low-density fine features, is a multi-purpose products, lining can be applied to the flame and heat resistant surface
A direct impact on high-temperature airflow.
Second, characteristics:
High temperature stability
Low thermal conductivity
Low heat capacity
Thermal shock resistance
Anti-erosion
Easy processing and cutting performance
Precise thickness and size
Good anti-flame and air scour
The installation of easy-to-use
Third, product applicati***:
Requirements can be applied at the same time tough, since the load-bearing areas and thermal insulation, it has a good performance against mechanical damage.
Areas include: push board kiln, ladle furnace, Bell kiln, tunnel kiln, roller kiln, aluminum melting furnace, heat treatment furnace, such as insulation in
Lining and backing; high-temperature thermal block plate; kiln car insulation; a variety of high temperature industrial furnace insulation.
Fourth, physical and chemical data
Model
STD-1000
HP-1260
HA-1420
HG-1600
Classification temperature (o C)
1000
1260
1420
1600
Bulk density (kg / m 3)
160-250
160-250
160-250
160-250
Re-burned linear shrinkage (%)
<1.4 (800oC
× 24hr)
<1.3 (1000oC
× 24hr)
<1.5 (1150oC
× 24hr)
<2 (1500oC
× 24hr)
Of
Science
Group
Into
%
Al 2 O 3
37
42
30
65
SiO 2 + Al 2 O 3
> 96
99
88
> 99
Fe 2 O 3
<1.0
0.2
0.2
--
ZrO 2
--
--
8
--
Product specificati*** (mm): the standard 600 × 400 × 20 ~ 50 900 * 600 × 20 ~ 50