1.0 INPUT
1.1 Voltage
|
Minimum |
Normal |
Maximum |
Unit |
|
100 |
115/230 |
240 |
Vrms |
1.2 Frequency
47Hz~63Hz
1.3 Current
0.5A.(MAX)
1.4 Inrush current
115V/40A(max.), 230V/80A(max.)
at 25℃at cold start.
1.5 Power efficiency
65% (min.) at full load, 110Vac or 230Vac 50Hz.
2.0 OUTPUT
2.1 Charge curve
|
Charger current(mA) |
|
Voltage(V) |
|
1000 |
|
|
|
4.2V+/-1.0% |
|
CC |
|
CV |
2.1.1Its a dual channel of the charger, give one or two 18650
batteries charging
2.1.2Its output voltage is 4.2+/-1%V at standby.
2.2 Led display
Green on standby
Red on charging
Green on full charge when charging current drop to 50+/-20mA.
3.0 PROTECTION
3.1Short circuit protection
The output short to ground, it will auto-recovery without damage.
3.2Output reverse input protection
When output reverse input,the unit and the battery will be no damage.
4.0 HI-POT
4.1 HI-POT
4.1.1 P~S:1800Vac 3S,the leakage current is lower than 10mA;;
5.0 ENVIRONMENT:
5.1 Ambient operation temperature
0℃ to +40℃
5.2 Ambient operation relative humidity
20% to 85%
5.3 Ambient storage temperature
-40℃to +70℃
5.4 Ambient storage relative humidity
10% to 95%
6.0 DROP TEST
6.1 Freely drop the wooden board from the height of 75cm
for two times per side(front/back/left/right).
7.0 VIBRATION TEST
7.1 Vibration frequency:5-60-5Hz with 10 oct***e/min@2.1G
7.2 Three circles per axis(X,Y,Z) for 10minutes
8.0 MTBF
40,000 hours base on bellcore TR332 document required at 25℃.
9.0 Outline
11.1.Outline dimension:105X 62X 41mmMAX;;
11.2.Profile:surface ***ooth ,no scar and mechanical damage.