皮带磨头机 Habasit AT-60手动皮带磨头机
适合Habasit哈伯斯特带皮带宽60mm
厚度限制2mm以内
加工方法:
1. 将皮带插入U型插销下
2. 滑动U型插销至锁紧状态
3. 转动圆盘手柄
4. 打磨至皮带与砂盘摩擦力较小时便可
5. 松***销，取出皮带
|
Tool Data Sheet AT-60 |
|
Picture
Product Designation
 |
|
| Product Group: | Preparing devices (skiving tools) |
| Joining System: | Thermofix |
Description
The AT-60 is a preparing device for skiving of Habasit belts and tapes up to a width of 60 mm and a thickness of 2 mm. The belt is clamped and stuck to a steel plate. It is ground manually by means of a grinding disk. Adjustment to belt thickness is possible in two steps.
The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance. It is not designed for fabrication in series.
The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site in maintenance. It is not designed for fabrication in series.
Technical Data
|
|
|
|
|
|
|
Belt/tape width max. for joining angle of 90°: |
60 |
mm |
2.4 |
in. |
|
Belt/tape width max. for joining angle of 75°: |
25 |
mm |
1 |
in. |
| Belt/Tape thickness max.: |
2 |
mm |
0.08 |
in. |
| Dimensi*** (LxWxH): |
220 x 190 x 85 |
mm |
8.7 x 7.5 x 3.4 |
in. |
| Max. skiving length: |
40 |
mm |
1.6 |
in. |
| Weight net: |
1.5 |
kg |
3.3 |
lbs. |
Operating Instructi***