PISO-PS600
PCI总线6轴高速步进/脉冲型伺服电机控制卡
DSP-based motion control card with PCI interface
Independent 6-axis motion control
Support both full-closed and semi-closed control modes
Maximum pulse output frequency: 4 Mpps.
Maximum Encoder input frequency: 12 Mpps
4-step home mode with auto-searching
2 ~ 6-axis linear interpolation function
2/3-axis circular interpolation function
Programmable T/S-curve acceleration and deceleration
Change speed and position on the fly
High-speed position latch and compare trigger
Home sensor, positive and negative limit sensors accepted for each axis
Support fully-functional manual-pulse-generator and jog functi***
Expandable distributed I/Os: 128 DI & 128 DO via two-wired FRnet interface
PISO-PS600 PCI Bus, High-Speed, DSP-based, 6-axis Motion Control Card with FRnet
DN-8368GB The Daughter Board is for General Purpose
DN-8368MB The Daughter Board is for Mitsubishi J2S Amplifier
DN-20M The Daughter Board is for FRnet Connector and Full function Manual-Pule-Generator
CA-MINI68-15 SCSI-II 68-pin Connector Cable 1.5 M
CA-SCSI20-M1 SCSI II 20-pin & 20-pin Male Connector Cable 1 M, for Mitsubishi Motor
CA-SCSI20-M3 SCSI II 20-pin & 20-pin Male Connector Cable 3 M, for Mitsubishi Motor
CA-SCSI20-M5 SCSI II 20-pin & 20-pin Male Connector Cable 5 M, for Mitsubishi Motor
CA-2P4C-0100 The Cable for FRnet Modules; Length: 100 M
运动控制卡
PISO-PS200 CR 高速2轴高速步进/脉冲型伺服电机运动控制卡，直线插补，圆弧插补，连续插补，可编程T/S曲线加减速
PISO-PS400 CR 高速4轴高速步进/脉冲型伺服电机运动控制卡，直线插补，圆弧插补，连续插补，可编程T/S曲线加减速
PISO-PS300U CR 3轴PCI总线脉冲型伺服电机控制卡
PISO-PS600 CR 6轴运动控制卡，直线插补，圆弧插补，连续插补，可编程T/S曲线加减速，带有FRNet接口，可接128DI/128DO高速I/O
PISO-Encoder600U CR 6路通用PCI总线编码器控制卡
PISO-Encoder300U CR 3路通用PCI总线编码器控制卡
Encoder-300 CR 3路ISA总线编码器控制卡，***大输入频率1MHz
Step-200 CR 2轴ISA总线步进电机控制卡，直线插补，圆弧插补
Servo-300 CR 3轴ISA总线伺服电机控制卡，直线插补，圆弧插补，每轴2500点丝杠螺距误差补偿，硬件故障检测
PMDK CR 基于DSP的运动***开发工具包