棕片顯影機/氨水機
*采用特殊設計的加熱裝置充分發揮氨氣顯影。
*本機箱采用304不鏽鋼材料，密封式顯影槽，耐腐蝕耐高溫矽膠密封，減少氨氣泄漏，中外合資電器零部件，鐵氟龍滾輪傳送進片平穩，易調節，簡單操作，方便好用，故障率低。
*旋鈕式控溫器方便調節，恒溫控制精確，自動控溫功能達到一定溫度自動關閉升溫，下降到一定溫度自動開啓加溫。
*內設抽風系統，只需加接排氣管到抽風口即可減少氣味。
*設有正反轉功能按鈕，操作員不小心將基片放歪，方便立即改正基片輸出方向。
最大特點：零配件耐磨，耐酸鹼；結構完密，氨氣泄漏少：顯影室內溫度是40度左右，棕片顯影後漲縮率低.
型號：EXP-H26
工作寬度：0-660mm（26英寸）
溫度控制：0度~110℃，可調。
預熱時間：15分鍾左右。
電 源： AC220V
額定功率：400W 2A
調速範圍：0-800mm/分鍾，可調
重 量：40KG
机械尺寸：L980×W480×H330(mm)
Film developer/ ammonia machine
* Specially designed heating device is adopted to bring ammonia gas developing into full play.
* 304 stainless-steel material, sealed developing trough and corrosion-resistant high-temperature silica gel sealing are adopted for this case to reduce ammonia gas leakage. Sino-foreign joint venture electrical appliance parts, Teflon roller transmission has stable film entering, it is easy to adjust, simple to operate, convenient and good to use, and the failure rate is low.
* Button temperature controller is convenient to adjust, constant temperature control is accurate, and automatic temperature control function can automatically close temperature rise after reaching certain temperature, and can automatically start temperature rise after lowered to certain temperature.
* The ventilation system is set inside, and odor can be reduced as long as adding exhaust pipe to the suction opening.
* The positive and negative going motion function button is set, if the operator places the substrate crooked carelessly, it is convenient to correct the substrate output direction immediately.
Most significant characteristics: The parts are wear resistant, acid and alkali resistant; the structure is sealed, with very little ammonia gas leakage; the developing indoor temperature is around 40 degrees, and the expansion and shrinkage rate is low after film developing.
Type：EXP-H26
Widty of working：660mm 26inch
Temperature control：0--110℃ adjustable
Time of Preheat：15min
Power supply：AC 220V
Power：400W 2A
Net weight：40Kg
Dimension of machine:：980mm×480mm×330mm