开关电源S-250系列
***格、高可靠 Low price and high reliability
105℃输出电容器 105℃ output capacitor
***适用AC输入电源 AC input power suitable for the world
效率高、工作温度低 High efficiency and low operation temperature
软启动电流、有效降低AC输入冲击 Soft-start current can reduce the AC input impact efficiency
有短路保护、过载保护 With short-circuit and overload protection
体积小、重量轻 Compact size, light weight
100﹪满负荷烧机测试 100﹪full-load burn-in test
内装EMI滤波器、纹波*** Installed with EMI filter, minimum w***e
|
型号 Mode
性能 Performance |
S-250-5 |
S-250-7.5 |
S-250-12 |
S-250-13.5 |
S-250-15 |
S-250-24 |
S-250-27 |
S-250-48 |
|
直流输出电压 DC output voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
|
输出电压容差 Output voltage tolerance |
&plu***n;2﹪ |
&plu***n;2﹪ |
&plu***n;1﹪ |
&plu***n;1﹪ |
&plu***n;1﹪ |
&plu***n;1﹪ |
&plu***n;1﹪ |
&plu***n;1﹪ |
|
额定输出电流 Rated output current |
45A |
33A |
20A |
18A |
16.5A |
10A |
9A |
5A |
|
输出电流范围 Output current range |
0～45A |
0～33A |
0～20A |
0～18A |
0～16.5A |
0～10A |
0～9A |
0～5A |
|
纹波及噪音 Ripple and noise |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
100mVp-p |
100mVp-p |
|
进线稳定度 Inlet stability |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
|
负载稳定度 Load stability |
&plu***n;1﹪ |
&plu***n;1﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
|
直流输出功率 DC output power |
225W |
240W |
240W |
240W |
240W |
240W |
240W |
240W |
|
效率 Efficiency |
74﹪ |
79﹪ |
83﹪ |
83﹪ |
84﹪ |
85﹪ |
85﹪ |
86﹪ |
|
直流电压可调范围 Adjustable range for DC voltage |
4.5-5.6V |
6-9V |
10-13.2V |
12-15V |
13.5-18V |
20-26.4V |
26-32V |
41-56V |
|
输入电压范围 AC input voltage range |
90～132VAC/180～264VAC由开关选择47～63Hz; 254～370VDC |
|||||||
|
输入电流 Input current |
3.6A/115V 1.8A/230V |
|||||||
|
冲击电流 AC dash current |
25A/115V 50A/230V |
|||||||
|
漏电流 Leakage current |
＜3.5mA/240VAC |
|||||||
|
过载保护 Overload protection |
105﹪～150﹪类型：切断输出 复位：自动*** 105﹪～150﹪ Type: pulsing hiccup shutdown reset: auto recovery |
|||||||
|
过电压保护 Over-voltage protection |
115%～135% |
|||||||
|
高温保护 High-temperature protection |
…………………. |
|||||||
|
温度系数 Temperature coefficient |
&plu***n;0.03﹪/℃(0～50℃) |
|||||||
|
启动、上升、保持时间 Startup .rise .retention time |
200ms, 100ms, 20ms |
|||||||
|
抗震性 Vibration |
10～500Hz, 2G 10min/1周期，时长60分钟，各轴 10～500Hz, 2G 10min/1 cycle , Period for 60 min , Each axes |
|||||||
|
耐压性 With standard voltage |
输入输出间：1.5KvAC输入与外壳： 1.5KvAC输出与外壳： 0.5KvAC Input and output internal ：1.5KvAC input and enclosure ： 1.5KvAC output and enclosure： 0.5KvAC |
|||||||
|
隔离电阻 Isolation resistance |
输入输出间： 输入与外壳，输出与外壳：500VDC/100MΩ Input and output internal: input and enclosure. Output and enclosure: 500VDC/100MΩ |
|||||||
|
工作温度、湿度 Working temperature and humidity |
-10℃～+60℃(参考输出特***)，20﹪～90﹪RH -10℃～+60℃(Refer to output derating curve，20﹪～90﹪RH |
|||||||
|
存储温度、湿度 Store temperature and humidity |
-20℃～+85℃, 10%～95%RH |
|||||||
|
外型尺寸 Overall dimension |
199×110×50mm |
|||||||
|
重量 Weight |
0.9kgs |
|||||||
|
安全标准 Safety standa*** |
设计交付UL1950 Design refer to UL 1950 |
|||||||
|
EMC标准 EMC standa*** |
设计表示FCC部分15J条件 等级A Design refer to FCC Part15J class A |
|||||||
|
备注： 1.以上参数测试条件为：230VAC输入，额定负载,25℃ 70%Rh,温度。 2．容差： 包括设定容差，线路稳定度，负载稳定度。 3．纹波测试：20MHz用“A12”双绞线，中断用0.1uF&47uF电容器短路。 4．进线电压稳定度测试：满负载时进线***低电压到***高电压。 5．负载稳定度测试：负载从0%到100%。 6.C3、4、32必须拆除。 Note : 1. The testing condition for the parameter above is : 230VAC input ,rated load, 25℃ 70%Rh. Temperature. 2. Error, include the setting error, line stability and load stability . 3. W***e test: adopt “A12” double wire for 20MHz, and 0.1UF & 47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to100% 6.C3、4、32 must be knocked down. |
||||||||