|
The ALR-9800 is supported by key RFID platformsincluding Microsoft BizTalk RFID, IBM WebSphere 6.0,Oat Systems, Or***e, GlobeRanger, BEA and manyothers. Proven support for SAP through 3rd-partymiddleware is also ***ailable. A well-documented SDKfeaturing .NET and J***a libraries enables easy, custominterfaces to control the reader if desired.The readers include support for remote fi rmwaremanagement and remote monitoring via the SimpleNetwork Management Protocol (SNMP), which enablesthe network to monitor real-time health, revision andstatus information from the reader.
Architecture XScale processor, Linux, 64 Mbytes RAM, 32
MBytes Flash
Supported RFID Tag
Protocols
EPC Gen 2; ISO 18000-6c
Reader Protocols Alien Reader Protocol, SNMP, fi rmware
upgradeable
LAN Protocols DHCP, TCP/IP, NTP
Dense reader
management
Dense Reader Mode, Event triggering
Frequency 902.75 MHz – 927.25 MHz
Channels 50
Channel Spacing 500 KHz
RF Power Max 4 watts EIRP with Alien Antenna
Power Tri-voltage AC/DC power converter; 45 Watts
maximum
120 or 240 VAC
Communicati*** RS-232 (DB-9 F), LAN TCPI/IP (RJ-45)
Antennas 4 ports; multistatic topology; circular or linear
polarization, reverse polarity TNC; requires
minimum of 2 antennas or external circulator
General Purpose Inputs/
Outputs
4 inputs, 8 outputs, optically isolated, 0.5 amp,
requires external power source of no more than
24 volts
Dimensi*** (L) 11” x (W) 9.0” x (D) 2.2”
Weight 2.0 kg (4.4 lb)
Operating Temperature -20°C to +50°C (-4°F to +122°F)
Dust and Moisture IP53
LED Indicators Power, Link, Active, Ant 0-3, CPU, Read, Sniff,
Fault (red)
Software SDK J***a and .NET APIs
Compliance Certifi cation Emissi***: FCC Part 15
Safety: UL 60950
|
