聚乙烯防腐涂层冲击试验机-导管式
CLC-E
一、聚乙烯防腐涂层冲击试验机满足标准：
SY0315-2005T 钢质管道单层熔结环氧粉末外涂层技术规范
GB/T 23257-2009 埋地钢质管道聚乙烯防腐层-附录K
二、聚乙烯防腐涂层冲击试验机产品概述：
本设备主要应用于一定质量的锤头升到指定的高度后，垂直下落至被测试品后，检测对样品的***程度。
本设备通过无限遥控控制交流电机的启动可以控制锤头高度的升降，通过遥控开关来控制对锤头的吸附和释放。通过限位开关控制锤头升降的高低。
锤头通过导管自由下落，本仪器操作简单，使用方便。
三、聚乙烯防腐涂层冲击试验机技术指标：
有效冲击高度：1500MM- 锤头重量：2000g&plu***n;2g,1000g&plu***n;2g
- 锤头直径径：Φ25MM ，Φ16MM
- 锤头材质：淬火钢制锤头
- 基座重量：≥40KG
- 遥控锤头自动升降
- 遥控自动挂锤和释放锤头
- ***大试样尺寸：直径300NN
- 设备尺寸：长*宽*高-900*600*2200（MM）
- 设备重量：100KG
四、聚乙烯防腐涂层冲击试验机标准配置：
- 主 机 一台
- 测控箱 一台
- 锤 头 两把
- 试样支座 一个
- 钢板尺 一个
- 高度限位开关 一个
- 电 机 一台
- 遥控钥匙 二把
- 水平泡 二个
英文简介如下：
Polyethylene anticorrosion coating impact test machine - catheter
CLC-E
==================================================
A, polyethylene anticorrosive coating impact test machine to meet the standard:
SY0315-2005T steel pipeline fusion bonded epoxy powder coating technical specification
GB/T 23257-2009 polyethylene coating for buried steel pipeline - appendix K
=================================================
Two, polyethylene anticorrosive coating impact test machine product overview:
This equipment is mainly used to hammer quality up to a specified height, vertical drop to the tested product, the extent of damage detection of samples.
This equipment by unlimited remote control AC motor starting can control the hammer height fluctuation, through the remote control switch to control the adsorption and release of the hammer. The limit switch control hammer lifting height.
Hammer through the catheter free fall, the instrument has the advantages of simple operation, easy to use.
====================================
Technical indicators three, polyethylene anticorrosive coating impact test machine:
1, the effective impact height: 1500MM
2, hammer weight: 2000g &plu***n; 2G, 1000g &plu***n; 2G
3, hammer diameter: Phi 25MM, Phi 16MM
4, hammer material: quenching steel hammer
5, the base weight: ≥ 40KG
6 hammer, remote automatic lifting
7, remote control automatic hammer hanging and release the hammer
8, the maximum sample size: 300NN diameter
9, the size of the equipment: length * width * height -900*600*2200 (MM)
10, the weight of equipment: 100KG
===================================
Four, polyethylene anticorrosive coating impact test machine standard:
1, the main machine
2, control box
3, hammer head tw
4, a specimen holder
5, a steel ruler
6, the height limit switch a
7, the electric machine
8, the remote control key two
9, a level bubble two