企业资质

深圳鑫博恒业科技有限公司

普通会员17
|
企业等级:普通会员
经营模式:
所在地区:广东 深圳
联系卖家:
手机号码:
公司官网:www.xbtes.com
企业地址:
本企业已通过工商资料核验!
企业概况

深圳市鑫博恒业科技有限公司是值得信赖的omega热电偶供货渠道商,专业批发omega测温线,omega热电偶感温线,omega热电偶测温线,omega热电偶插头我司以卓越的品质、价值和服务满足客户的需求,善用资源,薄利多销,创造速度与成本优势将竭诚为您服务!美国OMEGA公司是世界上最大的温度测试仪......

CN63500-R1-AL1-LV控制器 美国omega

产品编号:5956066                    更新时间:2014-10-16
价格: 来电议定
深圳鑫博恒业科技有限公司

深圳鑫博恒业科技有限公司

  • 主营业务:omega测温线|omega热电偶感温线|omega热电偶测...
  • 公司官网:www.xbtes.com
  • 公司地址:

联系人名片:

联系时务必告知是在"产品网"看到的

产品详情


CN63500-R1-AL1-LV控制器 美国omega

1/16 DIN上限/下限控制器
CN63500 Series
2年保修 新产品! CE
1/16 DIN上限/下限控制器
CN63500 Series:1/16 DIN上限/下限控制器
双四位LED显示
热电偶或热电阻传感器输入
远程复位输入
主要的限制输出:5个继电器,可选择为高或低的旅行的活化
5个继电器报警(可选)
可选的NEMA 4X(IP65)密封的前面板
通过可编程参数安全关闭
双重显示

该cn63500系列极限温度控制器,旨在提供一个***的关闭热过程。该cn63500接受各种温度传感器的信号(热电偶或热电阻元件),其综合规划使它能够满足各种应用的要求。双4位数字显示器可以观看过程中的温度和设定的同时。前面板指示通知的过程和状态输出操作符。主要的限制输出和报警输出,可现场更换。极限输出可选高或低的活化。如果过程温度超过一个高的旅行限制,或低于低的旅行限制,限制继电器断电启动一个进程关闭。极限输出不能被复位到温度***到适当的经营范围的过程;手动复位是必需的(本地或远程)。传感器故障,将启动一个进程关闭。继电器报警(S)可配置为启动根据各种动作(***的高或低,偏差高或低,或可调的滞后带)。备用功能***报警在电源装置的工艺稳定的报警区域之外。单位建造轻便,用彩色面板高冲击塑料盒。前面板符合NEMA 4X(IP65)规范正确安装时。多个单位可以水平或垂直堆叠。现代表面贴装技术,广泛的测试,豪华的高抗噪声干扰使cn63500在工业环境中非常可靠。

规格:
Display: 2-line by 4-digit LED
Upper (Main) Display: 10.2 mm (0.4") H red LED
Lower (Secondary) Display: 7.6 mm (0.3") H green LED
Power:
Line Voltage Models: 85 to 250 Vac, 50/60 Hz, 8 VA
Low-Voltage Models:
DC Power: 18 to 36 Vdc,7W
AC Power: 24 Vac &plu***n;10%, 50/60 Hz, 9 VA
Memory: Non-volatile E2PROM retains all programmable parameters and values
Environmental Conditi***
Operating Range: FM rated @ 0 to 65°C, UL rated @ 0 to 55°C
Storage Range: -40 to 80°C (-40 to 176°F)
Operating and Storage Humidity: 85% max relative humidity (non-condensing) from 0°C to 65°C (32 x 149°F)
Altitude: Up to 2000 m
Isolation Breakdown Ratings
AC Line With Respect to All Inputs and Outputs: 2300 V for 1 minute (250 V working)
Relay Contacts to All Other Inputs and Outputs: 2300 Vac
DC Power With Respect to Sensor Input: 50 V working (500 V for 1 minute)
Connection: Wire clamping screw terminals
Weight: 0.17 kg (0.38 lb)
Input Specificati***
Sensor Input
Sample Period: 100 ms
Step Resp***e Time: Less than 300 ms typical, 400 ms max (to within 99% of final value)
Normal Mode Rejection: >40 dB @ 50/60 Hz
Common Mode Rejection: >120 dB, DC to 60 Hz
Overvoltage Protection: Input overload 120 Vac for 15 s max
Failed Sensor Resp***e:
Main Output: Sensor failure will initiate a process shutdown
Display: "OPEN"
Alarms: Upscale
Indication Accuracy: &plu***n;(0.3% of span +1°C) @ 23°C ambient after 20 minute warm-up (includes NIST conformity, cold-junction effect, A/D conversion errors and linearization conformity
Span Drift (Maximum): 130 PPM/°C
Rtd Input: 2- or 3-wire, 100 &ugr***e; platinum, alpha = 0.00385 (DIN43760), alpha = 0.0039162
Excitation: 150 A typical
Lead Resistance: 15 Ω max per input lead
Remote Resent Input: Internally pulled up to 5 Vdc 1 mΩ
VIL: 0.85 V max
VIH: 3.65 V min
VIN Max: 5.25 Vdc
IOFF:1 μA max
Output Specificati***
Limit and Alarm Output Relays
Contact Rating: 5 A @ 250 Vac or 30 Vdc (resistive load) 1/10 HP @ 120 Vac (inductive load)
Life Expectancy: 100,000 cycles at max load rating (decreasing load increases life expectancy)
Limit Output:
CN63500-R1-AL1: Form "C" relay
CN63500-R1-AL2: Form "A" relay
Selectable for high or low trip activation, if the process temperature goes above the limit setpoint for a high trip, or below the limit setpoint for a low trip, the limit relay will deenergize to initiate a process shutdown; the limit output cannot be reset until the process temperature returns to the proper operating range; manual reset is required (local or remote)
AlarmOutputs: 1 or 2 form "A" relays
Modes: Absolute high-acting, absolute low-acting, deviation high-acting, deviation low-acting, inside band-acting, outside band-acting
Reset Action: programmable, automatic or latched; latched alarms can be reset regardless of limit exceed condition
Standby Mode: Programmable, enable or disable
Hysteresis: Programmable
Thermocouple Inputs
Types: T, E, J, K, R, S, B, N, linear mV, software selectable
Input Impedance: 20 MΩ, all types
Lead Resistance Effect: 0.25 μV/Ω
Cold-Junction Compensation: <&plu***n;1°C typical, (&plu***n;1.5°C max), error over 0 to 65°C (32 to 149°F) max ambient temperature range; defeated for linear mV indication mode
Resolution: 1° for all types, or 0.1° for T, E, J, K, and N only

Thermocouple
Type
Display
Range
Wire Color
ANSI BS1843
T -200 to 400°C
-328 to 752°F
(+) Blue
(-) Red
(+) White
(-) Blue
E -200 to 750°C
-328 to 1382°F
(+) Violet
(-) Red
(+) Brown
(-) Blue
J -200 to 760°C
-328 to1400°F
(+) White
(-) Red
(+) Yellow
(-) Blue
K -200 to 1250°C
-328 to 2282°F
(+) Yellow
(-) Red
(+) Brown
(-) Blue
R 0 to 1768°C
32 to 3214°F
(+) Black
(-) Red
(+) White
(-) Blue
S 0 to 1768°C
32 to 3214°F
(+) Black
(-) Red
(+) White
(-) Blue
B 149 to 1820°C
300 to 3308°F
(+)Grey
(-)Red
No standard
N -200 to 1300°C
-328 to 2372°F
(+) Orange
(-) Red
(+) Orange
(-) Blue
mV -5.00 to 56.00mV No standard No standard
 
RTD Type Range
385 -200 to 600°C (-328 to 1100°F)
392 -200 to 600°C (-328 to 1100°F)
Ω 2.0 to 320.0Ω

产品型号   产品描述
Standard Power Models (85 to 250 Vac, 50 to 60Hz)
CN63500-R1-AL2   Single output, form "A" relay, 2 alarms
Low-Voltage Models (18 to 36 Vdc)
CN63500-R1-AL1-LV   Single output, form "C", 1 alarm
CN63500-R1-AL2-LV  Single output form "A" relay, 2 alarms
CN63500-R1-AL2-4X  Single output form "A" relay, 2 alarms, NEMA 4X cover.
Accessories
CN6-RBDLA210   Output module, single-output, form "C" relay, 1 alarm
CN6-48111  Output module, single-output, form "A" relay, 2 alarms
 

CN63500-R1-AL1-LV控制器 美国omega

相关产品:

CN6221-R-AL控制器 美国omega

深圳鑫博恒业科技有限公司电话:传真:联系人:

地址:主营产品:omega测温线|omega热电偶感温线|omega热电偶测...

Copyright © 2024 版权所有: 产品网店铺主体:深圳鑫博恒业科技有限公司

免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。产品网对此不承担任何保证责任。