特点
▲ 防止工作机械因油温的变化而影响精度。
▲ 防止油质因高温劣化，保持油液粘度不变，使工作机械 稳定工作。
▲ 附有自动故障报警功能，可通过特定的方式及时提醒用户对装置进行检修，以免机件损坏。
▲ 油温控制以机体温度(室温)为依据，用户可根据机体温度设定油温，防止机械结构产生热变形。
▲ 沉浸式油液冷却控温装置不受杂质污染，不受切削金属粉末等所干扰，清洁简单、***容易;安装简便，不占 空间。
▲ Prevent mechanical work due to oil temperature changes may affect the accuracy.
▲ To prevent deterioration due to high temperature oil to maintain oil viscosity c***tant, mechanical stability to the work.
▲ With automatic fault alarm functi***, through a specific and timely manner to remind the user of the device for repair, so as to ***oid mechanical damage.
▲ Oil temperature control to body temperature (room temperature)as the basis, the user can set the temperature according to body oil, to prevent thermal deformation of the mechanical structure.
▲ Immersion oil cooling temperature control device from impurity contamination from metal powder, etc. interfere with cutting,cleaning is simple, easy to maintain; easy to install, does not occupy space.
产品简介
Introduction
冷油机是文恵自行研发设计的一款精密型制冷机，多数采用风冷散热方式;是由PID系统控制，选用进口温控器，温差为&plu***n;1℃，进口耐高温泵浦，高压力，大流量，采用***316不锈钢板式换热器达到***佳冷热交换效能。选用***进口品牌压缩机，使用寿命长久。机内主要控制电器和操作元件均为进口***，备更换媒体阀门，使用方便、优良坚固机架，护养极便。
Wenhui cold oil machine is a sophisticated research and design their own type of refrigerator, the majority of air-cooling methods; is controlled by a PID system, selection of imported thermostat, temperature difference of &plu***n;1℃, imports of high-temperature pump, high pressure, high-volume, high-efficiency316 stainless steel plate heat exchanger cold switching perform ance to achieve the most short-tailed bird. Selection of an efficient compressor imported brands, long service life. Inside the main control and operation of electrical components are imported brands, media, equipment replacement valve, easy to use,good solid frame, nursing will be very.
适用范围
▲ 车床、高速车床
▲ 内、外径研磨机
▲ 放电加工机
▲ 油压机械
▲ 磨床、拉床、铣床
▲ 综合加工中心机
▲ 木工雕刻机、切削机械等等
▲ Lathes,high speed lathe
▲ Internal,OD grinding machine
▲ EDM
▲ Hydraulic machinery
▲ Grinding,broaching,milling
▲ Machining Center
▲ Woodworking engr***ing 、machine,cutting machine,etc.
