SHS SERIES STH SERIES KNSCHA
● EGS Series large size capacitors have "self-standing" terminals
and can be directly soldered to printed circuit boards without any
fixing clamps or adhesive agents. They are easily fixed to printed
circuit boards due to the specially designed terminals.
■ SPECIFICATIONS
Series 系列SHSSTH
Category Temperature Range16V ~ 100V: -40 ~ +85℃16V ~ 100V: -40 ~ +105℃
160V ~ 450V: -25 ~ +85℃160V ~ 450V: -25 ~ +105℃
Nominal Cap. Range 标称容量范围82 ~ 33,000μF47 ~ 33,000μF
Capacitance Tolerance静电容量允许差-20% ~ + 20 % （-10 ~ + 30 % ）-20% ~ + 20 % （20 ℃，120Hz）
Leakage Current 漏电流 I=0.02 CV or 3(μA) whichever is smaller, after 5 min
Dissipation Factor(tanδ)Low Temp. ImpedanceStability at 120Hz 阻抗稳定性 16 V ~ 100V : Dissipation factor at 20℃，120Hz shall not exceed the values
given in the table of Standard Ratings 160V ~ 450V : ≤ 0.15
W. V .10162535506380100160 ~ 450
Z(-25℃)/Z(+20℃)433224
Z(-40℃)/Z(+20℃)1510865-
High Temp. Load Test 高温负荷测试 The following specifications shall be satisfied when the capacitors are restored to 20℃
after the rated working voltage applied for 2,000 hours at 85℃ (SHH, at 105℃)
Capacitance Change … ≤ ±15% of the initial value
Dissipation Factor … ≤ 200% of the initial specified value
DC Leakage Current … ≤ the initial specified value
High Temp. Non-Load Test 高温，非负载测试 The following specifications shall be satisfied when then capacitors are restored
to 20℃ after exposing them at the rated 85℃ (SHH, at 105℃) for 1,000 hours
without voltage applied to the capacitors for a minimum of 30 minutes, at least 24
hours but not more than 48 hours before the measurements.
Capacitance Change ... ≤ ±20% of the initial value
Dissipation factor ... ≤ 150% of the initial specified value
DC Leakage Current ... ≤ the initial specified value
成都承禹科技有限公司
地址：成都市成华区三环成渝立交外侧万科北街19号1019室
联系人：郭先生
手机： 13980421629
电话：028-84275808
网站： www.cy-