RA03M8894M 射频功率放大模块

DESCRIPTION

The RA03M8894M is a 3.6-watt RF MOSFET Amplifier Module for 7.2-volt portable radios that operate in the 889- to 941-MHz range.

The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a ***all leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 2.5V (minimum), output power and drain current increases substantially. The nominal output power becomes ***ailable at 3V (typical) and 3.5V (maximum). At VGG=3.5V, the typical gate current is 1 mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power

FEATURES

• Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=7.2V, VGG=0V)

• Pout>3.6W @ VDD=7.2V, VGG=3.5V, Pin=50mW

• ηT>32% @ Pout=3W (VGG control), VDD=7.2V, Pin=50mW

• Broadband Frequency Range: 889-941MHz

• Low-Power Control Current IGG=1mA (typ) at VGG=3.5V

• Module Size: 30 x 10 x 5.4 mm

• Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power

RoHS COMPLIANT

• RA03M8894M-101 is a RoHS compliant products.

• RoHS compliance is indicate by the letter “G” after the Lot Marking.

• This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts.

How ever ,it applicable to the following excepti*** of RoHS Directi***.

1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes.

2.Lead in electronic Ceramic parts.

Product Photos: