When synchronization of the driveN and driveR speed is required, Synchro-Link
BANDO Timing Belts give unsurpassed efficiency, economy and performance and are ***ailable in both inch (RMA) and metric dimensi***. BANDO timing belts offer these advantages:
•Popular Profiles – ***ailable in the high torque, low noise STS profile, the widely used HT curvilinear profile and the traditional Trapezoidal profile.
•Non-Slip, Positive Performance — Belt-pulley compatibility and close manufacturing tolerances assure that belt teeth mesh precisely with pulley grooves for c***tant output speed without skipping, vibration or speed variation.
•Extremely energy efficient - Studies by the US Department of Energy h***e found that synchronous belt drives are over 99% energy efficient, leading to lower operating costs.
•Low Maintenance/Economical Operation — Because BANDO timing belts do not require re-tensioning and, unlike gears or chain, require no lubrication, they are ideal for applicati*** where maintenance is difficult and downtime is costly.
•Low Tension Requirements — The “tooth grip” principle of timing belts does not require high tension, so bearing loads are minimized, resulting in longer bearing and motor life.
•Wide Range of Load Capacities and Speeds — Design versatility makes timing belts the right choice for a variety of applicati***. Speeds can range from 1 to over 10,000 RPM; load carrying capacity can vary from fractional to hundreds of horsepower.
•Space and Weight S***ings — Drives are compact because pulleys are ***all and center distances are short. Per horsepower tran***itted, timing belts weigh only a fraction of alternative methods.
•Clean, Quiet Operation — Noise and vibration are kept to a minimum. Clean operation is ideal for contamination sensitive machines.
BANDO Synchro-Link Super Torque Timing Belts
Due to its high power tran***ission capabilities, quiet, ***ooth running tooth meshing qualities, energy efficiency and reliability, the STS tooth profile is widely recognized by automotive design engineers as the preferred belt for overhead cam applicati*** in most late model cars and trucks. These same qualities make this generation of synchronous belts ideal for today's high performance industrial applicati***.
As the tooth meshes with the BANDO pulley groove, the cord lay forms an almost true circle, minimizing the cantilever effect on the co***, resulting in reduced bending fatigue and longer service life.
***ooth tooth engagement and direct contact of the belt tooth and the pulley groove enable the belt to run quietly, even at high speeds.
BANDO Timing Belts give unsurpassed efficiency, economy and performance and are ***ailable in both inch (RMA) and metric dimensi***. BANDO timing belts offer these advantages: •Popular Profiles – ***ailable in the high torque, low noise STS profile, the widely used HT curvilinear profile and the traditional Trapezoidal profile.
•Non-Slip, Positive Performance — Belt-pulley compatibility and close manufacturing tolerances assure that belt teeth mesh precisely with pulley grooves for c***tant output speed without skipping, vibration or speed variation.
•Extremely energy efficient - Studies by the US Department of Energy h***e found that synchronous belt drives are over 99% energy efficient, leading to lower operating costs.
•Low Maintenance/Economical Operation — Because BANDO timing belts do not require re-tensioning and, unlike gears or chain, require no lubrication, they are ideal for applicati*** where maintenance is difficult and downtime is costly.
•Low Tension Requirements — The “tooth grip” principle of timing belts does not require high tension, so bearing loads are minimized, resulting in longer bearing and motor life.
•Wide Range of Load Capacities and Speeds — Design versatility makes timing belts the right choice for a variety of applicati***. Speeds can range from 1 to over 10,000 RPM; load carrying capacity can vary from fractional to hundreds of horsepower.
•Space and Weight S***ings — Drives are compact because pulleys are ***all and center distances are short. Per horsepower tran***itted, timing belts weigh only a fraction of alternative methods.
•Clean, Quiet Operation — Noise and vibration are kept to a minimum. Clean operation is ideal for contamination sensitive machines.
BANDO Synchro-Link
Super Torque Timing BeltsDue to its high power tran***ission capabilities, quiet, ***ooth running tooth meshing qualities, energy efficiency and reliability, the STS tooth profile is widely recognized by automotive design engineers as the preferred belt for overhead cam applicati*** in most late model cars and trucks. These same qualities make this generation of synchronous belts ideal for today's high performance industrial applicati***.
As the tooth meshes with the BANDO pulley groove, the cord lay forms an almost true circle, minimizing the cantilever effect on the co***, resulting in reduced bending fatigue and longer service life.
***ooth tooth engagement and direct contact of the belt tooth and the pulley groove enable the belt to run quietly, even at high speeds.