概述 Introduction
蒸气温度调节器（以下简称蒸汽调温器）是由感温器和蒸汽（热水、热油）调节阀两个部套组合构成，根据被加热介质（水或油）的温度变化自动调节加热介质（蒸汽、热水、热油）的流量，广泛应用于各类船用、陆用加热装置的蒸汽调节。
基本参数 Basic Parameters
双温包补偿式感温器 Double-probe compensation
| 型号 Model |
公称感温包容积比 Nominal Volume ratio of probe V(一)/V(二) V(first)/V(second) |
感温包（一） Probe(second) |
感温包（二） Probe(second) |
反应时间S Resp***e time |
感温包长度mm Length of probe |
柱塞***大提升度mm Max lifting height of plunger |
||
| 行程变化率 mm/℃ Stroke change rate |
适用温度范围℃ Temperature adjusting range |
行程变化率 mm/℃ Stroke change rate |
适用温度范围℃ Temperature adjusting range |
|||||
| S4-0.5A | 0.35/1 | 0.5 | 0～120 | 0.175 | 20～30 | ≤25 | 420 | 12 |
| S4-0.5B | 0.5/1 | 0.25 | ||||||
| S4-0.5C | 0.7/1 | 0.35 | ||||||
| S4-0.5D | 1/1 | 0.5 | ||||||
| S4-0.5E | 1.4/1 | 0.7 | ||||||
说明Note：
1、毛细管标准长度为-3米，需要其他长度，应在订货时说明，***大长度为20米。
The standard capillary tube length is three (3) meters, other lengts up to twenty (20) meters are ***ailable upon request specified in your order.
2、反应时间系指在液体介质内。
The resp***e time means the time resp***ed in liquid medium.
单温包感温器 Single-probe temperature sensor
| 型号 Model |
行程变化率mm/℃ Stroke changerate |
适用温度范围℃ Temperature adjusting range |
反应时间S Resp***e time |
感温包长度mm Length of probe |
柱塞***大提升度mm Max lifting height of plunger |
| D4-0.3 | 0.25 | 0～160 | ≤25 | 420 | 12 |
| BD4-0.3 | 150 | ||||
| D4-0.5 | 0.5 | 0～120.40～160 | 420 | ||
| BD4-0.5 | 300 | ||||
| D4-1.0 | 1 | 0～60.30～90 60～120 |
420 | ||
| BD4-1.0 | 400 |
说明Note：
1、毛细管标准长度为-3米，需要其他长度，应在订货时说明，***大长度为20米。
The standard capillary tube length is three (3) meters, other lengts up to twenty (20) meters are ***ailable upon request specified in your order.
2、反应时间系指在液体介质内。
The resp***e time means the time resp***ed in liquid medium.
蒸汽调节阀 Steam control valve
| 型号 Model |
公称通径mm Nominal bore |
适用介质 Using medium |
热源介质 | 材料 | |||
| 蒸汽 Steam | 热水 Hot water | ||||||
|
额定蒸汽流量kg/h |
***大允许压差MPa(kgf/cm2) Max allowable prssure differense |
额定流量kg/h |
***大允许压差MPa(kgf/cm2) Max allowable prssure differense |
||||
| 1F1.6-15 | 15 | 蒸汽热水 Steam hot water |
110 | 1.764 | 0.85 | 1.59 | 铸铁 Castiron 铸钢 Cast steel 不锈钢 Stainless Steel |
| 1F1.6-20 | 20 | 200 | 0.735 | 1.54 | 0.686 | ||
| 1F1.6-25 | 25 | 320 | 0.440 | 2.26 | 0.441 | ||
| 1F1.6-32 | 32 | 520 | 3.725 | 4.00 | 3.629 | ||
| 2F1.6-40 | 40 | 800 | 2.157 | 6.00 | 1.569 | ||
| 2F1.6-50 | 50 | 1400 | 1.863 | 9.5 | 1.529 | ||
| 2F1.6-65 | 65 | 2000 | 0.980 | 15.2 | 0.980 | ||
| 2F1.6-80 | 80 | 3200 | 0.784 | 24 | 0.746 | ||
| 2F1.6-100 | 100 | 5000 | 0.588 | 37.00 | 0.530 | ||
| 2F1.6-125 | 125 | 7812 | 0.3 | 58 | 0.3 | ||
| 2F1.6-150 | 150 | 11250 | 0.19 | 83 | 0.19 | ||
三通热水调节阀 3 way hot water control valve
| 型号 Model |
公称通径 Nominal bore |
适用介质 Using medium |
额定热水流量t/h Rated hot water flow rate |
材料 Material |
| 3F1.6-2.5 | 25 | 热水 (hot water) |
2.26 | 铸铁 铸钢 不锈钢 castiron cast steel stainless steel |
| 3F1.6-32 | 32 | 4.00 | ||
| 3F1.6-40 | 40 | 6.00 | ||
| 3F1.6-50 | 50 | 9.5 | ||
| 3F1.6-65 | 65 | 15.5 | ||
| 3F1.6-80 | 80 | 24 | ||
| 3F1.6-100 | 100 | 37 |
型号表示方法 The model indicating method is listed below
蒸汽调节阀 Steam control valve:
三通热水调节阀 Three (3) way hot water control valve
3 F 1.6 - 100
100 公称通径mm Nominal bore(in mm)
1.6 公称压力MPa Nominal pressure (in Mpa)
F 连接方式：F-法兰 Connection method:F-flange connection
3 三通 Three (3) way
外形和安装尺寸 Outline and installation dimensi***
| 双温包补偿式感温调节器外形和安装尺寸 The outline and installation dimensi*** of double-probe compensation temperature controller |
螺旋形单温包感温调节器外形和安装尺寸 The outline and installation dimensi*** of spiral single-probe temperature controller |
 |
|
棒形单温包感温调节器外形和安装尺寸
The outline and installation dimensi*** of rod single-probe temperature controller
| 型号 Model |
L | E | G | G |
| BD4-0.3 | 150 | 22 | ZG1" | M36×2 |
| BD4-0.5 | 300 | 22 | ZG1" | M36×2 |
| BD4-1.0 | 400 | 23 | ZG1" | M36×2 |
| BD8-1.0 | 710 | 25 | G1 1/4" | M36×2 |