Bruel & Kjaer 3560-C 3109 4 Input 发生器输出 7533 LAN接口模

PULSE Type 3560-C Portable Data Acquisition Unit, up to 17 Input Channels

FEATURES
-Houses one input/output module and one controller module
-Robust casing for industrial and hard everyday use
-Rain cover for front panel allows passage of cables
-Battery operated or DC powered (10 32 V)
-Cooling fans can be turned off for silent operation (will automatically restart if too hot)
-Synchronous sampling with other PULSE front-ends

Type 3560-C is a portable data acquisition system with a battery/DC powered Type 2827 power supply unit. It can hold any combination of 1 Controller Module and 1 Input/Output Module (see
Fig. 1 and Table 1). The controller module handles communication with the PC while the input/output module handles measurement input and provides a sample clock. As an example, a Type 3560-C fitted with a 5/1-ch. Input/Output Controller Module Type 7537 and a 12-ch. Input Module Type 3038 can measure up to 17 input channels.]

Environmental
To survive the harsh electrical environment found in, for example, cars, Type 3560-C has specificati*** that exceed the European EMC immunity requirements. ISO 7637−1 and 7637 2
Road Vehicles − Electrical disturbance by conduction and coupling requirements are met.
Mechanical robustness is equally high, meeting MIL−STD−810C and IEC 60068−2−6.
Since all portable PULSE systems are built for outdoor use, they meet strict requirements for
temperature and humidity. The operating temperature range extends from −10 to +50°C (+14
to 122°F). Type 3560-C will withstand rain if kept with the front panel facing upwa*** and the protection cover in place.

Type 3109
The two output channels on Type 3109 can be used as signal generators with a frequency
range from 0 to 25.6 kHz and can supply all the signals necessary for performing system analysis.
Type 3109 is designed around a powerful digital signal processor and a 24-bit D/A converter,
and has exceptional flexibility, stability and accuracy. Output levels are adjustable in ha***are,
with maximum output ranging from 5mV to 5V RMS. Lower levels are possible by scaling
the signal to the D/A converter. The signal is provided by a BNC connector and can be referred
to ground or floating. It is possible to add a DC offset, but any unwanted DC offset is automatically removed.
Emergency Stop
The connector at the top of the module allows connection to an emergency stop control,
allowing you to stop the generators immediately.