Truck Crane
QY20B Truck Crane uses self-made truck crane special chassis, with powerful engine and fully-covered decking plate.
Main and auxiliary winches realize low speed with he***y load and high speed with light load, high working efficiency.
4-section telescopic boom of all-round boom profile, 1-section side-mounted jib, single cylinder for front support elevating, fully hydraulic drive, and double H-shaped outriggers.
Well-equipped safety devices such as automatic load moment limiter (AML), overload and over-wind cut-out device, etc., greatly improved safety in operation.
Two cabs ergonomically designed conform to ISO standard, fan, heater and air conditioner equipped acc. to requirement. Driver’s cab is left semi-mounted, fitted with damping and adjustable seat. Operator’s cab is right semi-mounted, equipped with LCD monitor for display of crane various moti***.
Technical Data for Lifting Operation
Classificatory
|
Item |
Unit |
Parameter |
|
Engine |
Model |
6C250-2 |
||
Outline dimension |
Overall length |
mm |
12000 |
|
Overall width |
mm |
2500 |
||
Overall height |
mm |
3300 |
||
Wheel base |
Axle 1 |
mm |
5000 |
|
Axle 2, Axle 3 |
mm |
1350 |
||
Track |
Front wheel (Axle 1) |
mm |
2090 |
|
Rear wheel (Axle 2, Axle 3) |
mm |
1865 |
||
Mass |
Total mass in tr***el state |
kg |
24850 |
|
Axle load |
Axle 1 |
kg |
6998 |
|
Axle 2, Axle 3 |
kg |
17980 |
||
Tr***el performance |
Tr***el speed |
Max. tr***el speed |
km/h |
72 |
Min. stable tr***el speed |
km/h |
4 |
||
Turning diameter |
Min. turning diameter |
m |
20 |
|
Min. turning diameter at boom tip |
m |
24 |
||
Min. ground clearance |
mm |
270 |
||
Approach angle |
(°) |
21 |
||
Departure angle |
(°) |
11 |
||
Braking distance (at 30km/h with full load) |
m |
9.5 |
||
Max. grade-ability |
% |
35 |
||
Exterior noise at acceleration |
dB(A) |
88 |
||
Fuel c***umption for 100km |
L |
35 |
||
Power |
Engine rated output |
kW/(r/min) |
184/2200 |
|
Engine rated torque |
N.m/( r/min) |
958/1400 |
||
Engine Rated speed |
r/min |
2200 |
Main Technical Data for Lifting Operation
Classificatory
|
Item |
Unit |
Parameter |
|||
Lifting performance |
Max. total rated lifting capacity |
t |
20 |
|||
Min. rated working radius |
m |
3 |
||||
Turning radius at turntable tail |
m |
3.38 |
||||
Max. load moment |
Base boom |
kN.m |
833 |
|||
Fully extended boom |
kN.m |
458.6 |
||||
Outrigger span |
Longitudinal |
m |
4.97 |
|||
Lateral |
m |
5.4 |
||||
Lifting height |
Base boom |
m |
10.2 |
|||
Fully extended boom |
m |
31.7 |
||||
Fully extended boom + Jib |
m |
39.9 |
||||
Boom length |
Base boom |
m |
10.1 |
|||
Fully extended boom |
m |
31.2 |
||||
Fully extended boom + Jib |
m |
31.2+8.15 |
||||
Working speed |
Boom raising time |
s |
75 |
|||
Boom full extension time |
s |
95 |
||||
Max. swing speed |
r/min |
3 |
||||
Hoist speed |
Main winch |
Full load |
m/min |
40 |
||
No load |
m/min |
90 |
||||
Aux. winch |
Full load |
m/min |
30 |
|||
No load |
m/min |
60 |
||||
Noise limit |
Crane exterior noise |
dB (A) |
≤118 |
|||
At seated position |
dB (A) |
≤90 |