ALPHA NR205免洗无松香助焊剂 *** 1008-2
NO-CLEAN, LOW RESIDUE FLUX
DESCRIPTION
Alpha NR205 is a halide-free, rosin/resin free, low solids, no-clean flux. It is formulated for w***e soldering of through-hole, mixed technology and surface mount assemblies. The flux is particularly effective when soldering in an inert atmosphere. The flux produces a tack-free surface with high surface insulation resistance and very little residue to interfere with electrical testing. Alpha NR205 fully conforms to the requirements of Bellcore TR-NWT-000078. The flux has been specifically formulated to resist degradation in surface insulation resistance and electromigration, even in situati*** where the flux does not experience soldering
temperatures and when he***y levels of flux h***e been applied. The residues are non-corrosive and do not cause "greening" when in contact with copper or copper-bearing alloys.
Alpha NR205 is particularly well-suited for touch-up/rework when supplied in a flux pen. Alpha “WriteFlux” pens make local flux application an easily controlled process.
FEATURES & BENEFITS
• High activity
• Meets bellcore requirements & other critical sir tests
• Very safe residues
• Non-corrosive residues
• Good soldering in air; excellent soldering in nitrogen for low defects
• High reliability assemblies, even when the flux does not experience soldering temperatures
• Excellent for touch-up/rework applicati***
• Will not cause "greening" on exposed copper/copper alloys
APPLICATION
Alpha NR205 flux is designed for foam, spray, and w***e applicati***. Topside preheat temperatures of 80-105°C (180-220°F) are recommended. Flux solids can be monitored using Alpha's Flux Solids Control Kit #3. If thinning is required, the use of Alpha 493 thinner is recommended. For applicati*** which specify cleaning, a water cleaning step with Alpha 2110 saponifier or Alpha Autoclean 40, after soldering, will remove any slight traces of flux residues.
For application via the flux pen, the nib should be lightly wiped on and around the solder joint to be reworked. Once a suitable amount of flux has been applied the manual soldering operation can be performed.
Technical Specificati***
Appearance: Clear, colorless liquid
Solids Content, wt/wt: 2.15
Specific Gr***ity @ 25°C (77°F): 0.797 &plu***n; 0.002
Acid Number (mg KOH/g): 16.5 &plu***n; 1.0
Halides: NONE
Flash Point (T.C.C.): 13°C (56°F)
Recommended Thinner: 493
IPC J-STD-004 Designation ORL0
汉泰电子辅料有限公司是大陆地区***早从事***T工艺研究与制作的贸易商之一。公司具有多年电子行业从业经验，拥有一支高素质的***技术团队，专注服务于***T和PCB工艺制造焊接材料领域，主营阿尔法助焊剂、阿尔法锡膏、千住锡膏、阿米特锡膏、减摩锡膏、KOKI锡膏、铟泰锡膏、田村锡膏、***T贴片红胶、富士红胶、乐泰胶水、锡丝、锡条等***T焊接材料，欢迎来电咨询洽谈，我们将竭诚为您服务。
更多产品信息请登录http://