美国生产3wAB音频功放IC CCT5803

single-end (SE) mode for headphone drive into a single chip, where both modes are easily switched by the SE
/ BTL input control pin signal.
GENERAL DESCRIPTION
CCT5803 is a monolithic integrated circuit, which provi
des precise DC volume control, and a stereo bridged
audio power amplifiers capable of producing 3 W (2.5 W) into 4
㰰㈰䐾㰰㐸䘾
ꆡ
with less than 10% (1.0%) THD + N. The
attenuator range of the volume control in CCT5803 is from 20 dB (DC_Vol = 0 V) to
㰰ぅ䐾
80dB (DC_Vol = 3.54 V)
with 32 steps. The advantage of internal gain setting
can be less components and PCB area. Both of the
depop circuitry and the thermal shutdown protection circuitr
y are integrated in CCT5803, that reduce pops and
clicks noise during power up or shutdown mode operat
ion. It also improves
the power off pop noise and
protects the chip from being destroy
ed by over temperature and short current failure. To simplify the audio
system design, CCT5803 combines a stereo bridge-
tied loads (BTL) mode for speaker drive and a stereo
FEATURES
ꇴ
  Low Operating Current with 9mA
ꇴ
  Improved Depop Circuitry to Eliminate
Turn-on and Turn-off Transients in Outputs
ꇴ
  High PSRR
ꇴ
  32 Steps Volume Adjustable by
 DC Voltage with Hysteresis
ꇴ
  3W per Channel Output Power into 4
㰰㈰䐾
 Load at 5 V, BTL Mode
ꇴ
  Two Output Modes Allowable with BTL and SE Modes Selected by SE / BTL pin
ꇴ
  Low Current C***umption in Shutdown Mode (1¦&Igr***e;A)
ꇴ
  Short Circuit Protection
ꇴ
  Thermal shutdown protection and
over current protection circuitry
ꇴ
  Maximum Output Swing Clamping Function
ꇴ
  ESOP16 Package (with Thermal Pad )
TYPICAL APPLICATI***
ꇴ
 
Notebook PC
 
ꇴ
 
LCD Monitor or TV