LEA-6T 2011年全新模块
50通道的u - blox公司6接收机
GPS C / A码
GALILEO L1 open service (with upgrade)
SBAS: WAAS, EGNOS, MSAS, GAGAN
更新率：5赫兹，2赫兹
2.5米CEP的位置
***扩增系统2.0米CEP证书
Acquisition1 LEA-6H/6S的LEA - 6A
冷启动：28第32 s
暖启动：28第32 s
计算机辅助starts2：1秒<3秒
热启动：1秒1秒
Sensitivity3 LEA-6H/6S的LEA - 6A条
跟踪：高达-160 dBm高达-160 dBm
重新获得：高达-160 dBm高达-160 dBm
冷启动：-147 dBm的-146 dBm的
30 ns的定时精度均方根
99％<60纳秒
精度21纳秒
0.25赫兹脉冲时间为1千赫
A - GPS的支持和网上的AssistNow
的AssistNow Offline，
支持OMA SUPL标准
作业的限制速度：500米/秒（972节）
海拔高度：50,000平方米
工作温度。-40 ° C至85℃
贮藏温度。-40 ° C至85℃
Highlights
• Precision Timing:
- 2 timepulse outputs (up to 10 MHz)
- Output timepulse with at least one satellite in view
- Stationary mode for GPS timing operation
- Time mark of external event inputs
• Raw data
• Onboard non-volatile memory for configuration storage
• UART, USB and DDC (I2C compliant) interfaces
• Onboard RTC Crystal for faster warm and hot starts
Features
• u-blox 6 position engine:
- N***igate down to -160 dBm and -147 dBm coldstart
- Configurable power management
- Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS, GAGAN)
- Up to 5 Hz n***igation rate
- Anti-jamming technology
• A-GPS: AssistNow Online and AssistNow Offline services,
OMA SUPL compliant
• Backward compatible (ha***are and firmware); easy
migration from LEA-5T or LEA-4T
• Based on AEC-Q100 qualified GPS chips
• Manufactured in ISO/TS 16949 certified sites
• LCC package for reliable and cost effective manufacturing
• Operating temperature range: -40 to 85°C
The LEA-6T provides precision GPS timing for demanding
positioning applicati*** such as femto cells and WiMAX basestati***.
This module features user configurable frequency
output and timepulse. An accuracy of up to 15 ns is achievable
by using the quantization error information to compensate the
granularity of the time pulse. The LEA-6T features a time mode
function whereby the GPS receiver assumes a stationary 3D
position, whether programmed manually or determined by an
initial self-survey.
During stationary operation GPS timing is possible with only
one visible satellite. This means that time can be output even
under adverse signal conditi*** or in environments with poor
sky visibility. A built-in time mark and counter unit provide
precise time measurement of external event inputs. T-RAIM
(Timing Receiver Autonomous Integrity Monitoring) is ***ailable
to detect faulty GPS measurements. Raw data is also provided.
LEA-6T modules are based on AEC-Q100 qualified GPS chips
and are manufactured in ISO/TS 16949 certified sites. Qualification
tests on LEA-6T modules are performed as stipulated in
the ISO16750 standard: “Road vehicles – Environmental conditi***
and testing for electrical and electronic equipment”.
• Microsoft® certified USB driver
Receiver type 50-channel u-blox 6 engine
GPS L1 C/A code
SBAS: WAAS, EGNOS, MSAS, GAGAN
N***igation update rate up to 5 Hz
Accuracy1 Position 2.5 m CEP
SBAS 2.0 m CEP
Acquisition1 Cold starts: 29 s
Aided starts2: < 1 s
Hot starts: < 1 s
Sensitivity3 Tracking: –160 dBm
Reacquisition: –160 dBm
Cold starts: –147 dBm
Hot starts: –156 dBm
1 All SV @ –130 dBm
2 Dependent on aiding data connection speed and latency
3 Dem***trated with a good active antenna
Electrical data
Timing accuracy RMS 30 ns
99% < 60 ns
Granularity 21 ns
Compensated 15 ns4
4 Quantization error information can be used to compensate the granularity
Power supply 2.7-3.6 V
Power c***umption 119 mW @ 3.0 V (Max. Performance)
115 mW @ 3.0 V (Eco mode)
Backup power 1.4-3.6 V, 25 μA
Supported Antennas Active and passive
Antenna power External or internal VCC_RF
Antenna supervision Integrated short-circuit detection and
antenna shutdown, open circuit detection
with minimal external circuitry
Serial interfaces 1 UART
1 USB V2.0 full speed 12 Mbit/s
1 DDC (I2C compliant)
Digital I/O 2 configurable timepulse
1 EXTINT input
1 reset
Serial and I/O voltages 2.7-3.6 V
Timepulse Configurable 1/60 Hz to 10 MHz
Time mark / Counter 1 Input
Protocols NMEA, UBX binary
Operating temp. –40° C to 85° C
Storage temp. –40° C to 85° C
Humidity JEDEC MSL 4