技术参数：
安全要求：
一、光氧净化设备处理室与电源控制系统及电源连接部分严格分离，所有需连接部分抗高温，防腐蚀电线和橡胶进行密封处理，不容许任何带电部分与废气接触， 电路部分设置多重过压、过流、短路保护，保证电器部件即使发生瞬间漏电短路情况，也不会引燃爆光解室内***气体。
二、UV光管全部用耐高温特殊材质结晶管套（安全、防碎、99%的穿透性、100%的防止灯管内的物质溢出）。
三、所有高能C波光管均采用***专用电源模块供电，该电源模块具备过压、过流、短路、超高温等保护功能，高能C波光管一有异常，电源模块即停止该光管的运行并发出警示。
四、本设备内部结构精密，非本公司***维护人员不得随意打开设备，一面造***为原因导致设备的损坏。
五、设备在运行过程中，会瞬间产生大量的强刺激性UV光线，严禁人员眼睛或皮肤直接暴露在光源中，需在有安全防护措施的情况下观察。
应用范围：
化工、喷漆、涂装、电子、冶金、电镀、纺织(化纤)、食品、机械制造、实验室、五金、仪表、塑料、电子等行业的生产过程中所产生的工业废气、市政工程，炼油，印刷，涂装，喷漆，冶金，化肥，造纸，服装，医药，香精香料等行业。
袋式除尘设备
袋式除尘设备是一种干式滤尘装置。它适用于捕集细小、干燥、非纤维性粉尘。滤袋采用纺织的滤布或非纺织的毡制成，利用纤维织物的过滤作用对含尘气体进行 过滤，当含尘气体进入袋式除尘设备后，颗粒大、比重大的粉尘，由于重力的作用沉降下来，落入灰斗，含有较细小粉尘的气体在通过滤料时，粉尘被阻留，使气体 得到净化。
工作原理：
含尘气体由灰斗（或下部宽敞开式法兰）进入过滤室，较粗颗粒直接落入灰斗或灰仓，灰尘气体经滤袋过滤，粉尘阻留于滤袋表面，净气经袋口到净气室、由风机排 入大气，当滤袋表面的粉尘不断增加，导致设备阻力上升至设定值时，时间继电器（或微差压控制器）输出信号，程控仪开始工作，逐个开启脉冲袋式阀，使压缩空 气通过喷口对滤袋进行喷吹清灰，使滤袋突然膨胀，在反向气流的作用下，附于滤袋表面的粉尘迅速脱离滤袋落入灰斗或灰仓内，粉尘由卸灰阀排出，全部滤袋喷吹 清灰结束后，除尘设备***正常工作。
脉冲袋式袋式除尘设备设备正常工作时，含尘气体由进风口进入灰斗，由于气体体积的急速膨胀，一部分较粗的尘粒受惯性或自然沉降等原因落入灰斗，其余大部 分尘粒随气流上升进入袋室，经滤袋过滤后，尘粒被滞留在滤袋的外侧，净化后的气体由滤袋内部进入上箱体，再由阀板孔、排风口排入大气，从而达到除尘的目 的。随着过滤的不断进行，除尘设备阻力也随之上升，当阻力达到一定值时，清灰控制器发出清灰命令，首先将提升阀板关闭，切断过滤气流;然后，清灰控制器向 脉冲袋式电磁阀发出信号，随着脉冲袋式阀把用作清灰的高压逆向气流送入袋内，滤袋迅速鼓胀，并产生强烈抖动，导致滤袋外侧的粉尘抖落，达到清灰的目的。由 于设备分为若干个箱区，所以上述过程是逐箱进行的，一个箱区在清灰时，其余箱区仍在正常工作，保证了设备的连续正常运转。Technical parameters:
Security requirements:
First, the processing room of the light oxygen purification equipment is strictly separated from the power control system and the connection part of the power supply. All the parts need to be connected to the high temperature, the corrosion protection wire and the rubber are sealed, and no charged part is allowed to contact with the exhaust gas. The circuit part sets multiple overvoltage, over current and short circuit protection to ensure the electrical components even if the components are sent. Instant leakage and short-circuit will not ignite the indoor explosive gas.
Two, UV light tube all use high temperature special material crystal tube sleeve (safety, anti shatter, 99% penetration, 100% to prevent material overflow in the tube).
Three, all high-energy C optical tubes are powered by independent special power supply module. The power module has overvoltage, over current, short circuit, ultra high temperature and other protection functi***, high energy C optical tube is abnormal, the power module stops the operation of the light tube and sends out warning.
Four. The internal structure of this equipment is very precise. It is not necessary for our professional maintenance personnel to open the equipment at will.
Five. During the operation of the equipment, a large number of strong stimulant UV rays will be generated instantaneously, and the eyes or skin of the personnel are strictly forbidden to be exposed directly to the light source, and it is necessary to observe in the case of safety protection.
Application scope:
Industrial waste gas, municipal engineering, refinery, printing, coating, paint, metallurgy, spray paint, metallurgy, chemical fertilizer, papermaking, clothing, medicine, fragrance and fragrance in the production process of the production process of the chemical industry, spray paint, coating, electronics, metallurgy, electroplating, textile (chemical fiber), food, mechanical manufacturing, laboratory, ha***are, instrument, plastic, electronics and other industries. Materials and other industries.
Bag type dust removal equipment
The bag type dust removal equipment is a dry type dust filter. It is suitable for collecting fine, dry and non fibrous dust. The filter bag is made of textile filter cloth or non textile felt. The filter effect of the fabric is used to filter the dust gas. When the dust gas enters the bag type dust removal equipment, the large particles and the larger dust are settled down in the ash ***et because of the effect of gr***ity, and the gas containing the ***aller dust is passed through the filter material. The dust is blocked and the gas is purified.
Working principle:
The dust gas is entered into the filter chamber by the ash ***et (or the lower open flange in the lower part), and the coarse particles fall directly into the ash hopper or the ash bin. The dust gas is filtered through the filter bag and the dust is kept on the surface of the filter bag. The net gas is drained through the bag to the air cleaning chamber and the fan is discharged into the atmosphere. When the dust on the surface of the filter bag does not increase, the resistance of the equipment rises to the set. When the value is fixed, the time relay (or the micro differential pressure controller) output signal, the program control instrument begins to work, opens the pulse bag valve one by one, makes the compressed air blows the filter bag through the nozzle, so that the filter bag expands suddenly, and the dust attached to the filter bag is quickly separated from the filter bag and falling into the ash ***et or ash under the action of the reverse airflow. Dust in the warehouse is discharged by the ash unloading valve, and after all the filter bags are blown and cleaned, the dust removal equipment returns to normal work.
When the pulse bag type bag type dust removal equipment is working normally, the dust gas is entered into the ash ***et from the inlet. Because of the rapid expansion of the volume of the gas, some of the coarser dust particles fall into the ash ***et, such as the inertia or natural settlement, and the rest of the dust particles go up into the bag room with the air flow, and the dust particles are stranded in the filter bag after the filter bag filter. On the outside side, the purified gas enters the upper box through the filter bag, and then is discharged into the atmosphere by the valve plate hole and the air outlet, so as to achieve the purpose of dust removal. With the continuous filtration of the filter, the resistance of the dust removal equipment also rises. When the resistance reaches a certain value, the ash cleaning controller sends out the ash clearing order. First, the lifting valve plate is closed and the filter air is cut off. Then, the dust controller sends out the signal to the pulse bag type solenoid valve, with the pulse bag valve used as the high-pressure reverse gas used as the ash cleaning valve. In the bag, the filter bags bulge rapidly and produce strong jitter, which causes the dust on the outside of the filter bag to shake off and achieve the purpose of ash cleaning. As the equipment is divided into several box areas, the above process is carried out by box. In the case of ash clearing, the remaining box area of a box area is still working normally, ensuring the continuous normal operation of the equipment.