CY8CKIT-002 PSoC MiniProg3
The PSoC® MiniProg3 Program and Debug Kit is an all-in-one programmer for PSoC 1, PSoC 3 and PSoC 5 architectures, debug tool for PSoC 3 and PSoC 5 architectures, and a USB-I2C Bridge for debugging I2C serial connecti*** and communicating to PSoC devices.
The Miniprog3 supports the following protocols:
• SWD
• JTAG
• ISSP
• USB-I2C
Included with the kit is a 10-pin ribbon cable for connecting to standard 10-pin JTAG header interfaces utilized for our PSoC 3 and PSoC 5 architectures while the device itself supports the 5-pin ISSP programming header for PSoC 1 architectures. The 5-pin connector also supports the USB-I2C Bridging capabilities and is a superset of the CY3240 capabilities. Please note, the CY8Ckit-002 only contains the Miniprog3 and supporting cables
Important Usage Note:
There is an electrical risk may be seen when customers reverse the 5 or 10 pin connector when trying to program or debug a system. By doing this power and ground connecti*** will be connected to an electrically vulnerable configuration. This configuration may cause damage to the Miniprog3 resulting in failures. This often occurs when customers h***e a non keyed connectors or header for their system. The user must be aware of the polarity settings on the target board and/or use keyed connectors when trying to program using the Miniprog3. An update to the Miniprog3 will be ***ailable in late 2011 that will add ESD protecti*** to the programmer.
Kit Contents:
- MiniProg3
- Program/Debug Ribbon Cable
USB
任***
***************************************************
深圳军盛微芯电子科技有限公司
TEL:0755-83952019
MOB:13602543225
FAX:0755-83952019
ADD:深圳市福田区中航路鼎诚国际大厦1210
EMAIL:57155298@***.COM
***************************************************