大型造雪机 户外造雪机 滑雪场造雪机 造雪机价格 造雪机厂家 造雪机供应
金耀造雪机使用与***
Use and Maintenance of Jinyao Snow Maker
开机前检查电源连接处是否有虚连。电压是否稳定。如果是发电机组供电，持续供电不可低于380伏。阀门是否结冰堵塞。如堵塞可开启电加热进行预热。喷嘴，核子器与喷头连接处是否密封。如密封圈老化或渗漏及时更换。确保风机及空压机正转。空压机油液面保持在红线处。造雪时如有结冰要及时清除以免飞溅伤人。每次造雪前检查压力表，气压表泄压阀性能；皮带涨紧度；使用完毕后把管路内余水排清。根据当地水质适当清洗喷嘴和过滤网。轴承,螺栓,伸缩杆,转盘定期注油保持各部件润滑度。每个雪季更换一次机油和空气滤芯。
Check the virtual connection at the power connection before starting. Is the voltage stable? If the power supply is from a generator set, the continuous power supply shall not be less than 380 volts. Is the valve frozen and blocked? If blocked, electric heating can be turned on for preheating. Is the joint of nozzle, nucleator and nozzle sealed? If the seal ring aging or leakage timely replacement. Ensure positive rotation of fan and air compressor. The oil level of the air compressor is kept at the red line. If there is ice during snow making, it should be cleared in time to ***oid splashing and injuring people. Check the performance of pressure gauge, pressure relief valve of barometer, belt tightening before each snowmaking, and drain the remaining water in the pipeline after use. Clean nozzles and filters properly according to local water quality. Bearings, bolts, telescopic rods, turntables are regularly oiled to maintain the lubrication of the components. Change the oil and air filters once every snowy season.
更详细参数及其它问题请来电或来厂咨询
For more detailed parameters and other questi***, please call or c***ult the factory.
温馨提示：我工厂所有设备发货方式均为货运物流，运费由地方远近和货物方数决定，具体运费请来电详询，以便造成不必要的误会！
Warm Tip: All the equipment in our factory are shipped by freight logistics. Freight is decided by local distance and the number of goods. Please call for detailed information on the specific freight, so as to cause unnecessary misunderstanding!
PS：产品所有价格均为网上报价，请以实物为准，具体价格请来电详询！！！
PS: All the prices of the products are quoted online. Please refer to the actual products. Please call for detailed information on the specific prices!!!
sdjyyangshuyuan