福斯FUCHS RENOLIN UNISYN CKC100合成齿轮油
福斯FUCHS RENOLIN UNISYN CKC100合成齿轮油
福斯FUCHS RENOLIN UNISYN CKC100合成齿轮油
设计用于工业齿轮箱和一般的润滑系统受高温，RENOLIN UNISYN CKC油是全合成润滑油基于聚α-烯烃。RENOLIN UNISYN CKC油减少摩擦、降低磨损。此外，这些油提高了机器部件的效率。根据不同的应用，多个粘度等级可以由一个单一的RENOLIN UNISYN CKC油满意。这可以让用户合理化库存和降低成本。聚α烯烃，从而RENOLIN UNISYN CKC油，可与矿物油都比兼容，可设置等。与普通机械材料聚α烯烃的相容性，密封和油漆与矿物油的比较。改变过去RENOLIN UNISYN CKC因此非常简单，无需事先冲洗。RENOLIN UNISYN CKC油可分为CKC润滑油根据ISO 6743-6
使用RENOLIN UNISYN CKC油的具体利益：
耐老化性好
优良的防腐蚀保护
良好的流动性
优良的粘度-温度特性
应用：
RENOLIN UNISYN CKC油可用于轴承、润滑系统和高或温度波动变速箱。
在齿轮箱和润滑系统的油底壳温度超过90°C，普通矿物油更换周期可以显著延长RENOLIN UNISYN CKC油，反过来，大幅降低运营和处置成本。
当改用RENOLIN UNISYN CKC油的机器和设备，经营超过60°C的温度，比普通矿物油等级应选择低粘度等级。
| RENOLIN UNISYN CKC | 68 | 100 | 150 | 220 | 320 | 460 | 680 | ||
| Lubricating oil type | |||||||||
| acc. to ISO 6743-6 | CKC 68 | CKC 100 | CKC 150 | CKC 220 | CKC 320 | CKC 460 | CKC 680 | ||
| acc. to DIN 51 502 | HC 68 | HC 100 | HC 150 | HC 220 | HC 320 | HC 460 | HC 680 | ||
| Characteristics | Unit | Test method | |||||||
| Kinematic viscosity | |||||||||
| at 40 °C | mm²/s | 72 | 104 | 151 | 221 | 315 | 479 | 668 | ASTM D 445 |
| at 100 °C | mm²/s | 11.1 | 14.9 | 19.4 | 25.8 | 33.3 | 45 | 62 | ASTM D 445 |
| Viscosity index | 146 | 149 | 147 | 148 | 148 | 149 | 159 | ASTM D 2270 | |
| Density at 15 °C | kg/l | 0.837 | 0.842 | 0.848 | 0.85 | 0.851 | 0.853 | 0.855 | ASTM D 1298 |
| Flash point, Cleveland open cup | °C | 248 | 254 | 230 | 232 | 234 | 304 | 262 | ASTM D 92 |
| Pour point | °C | -51 | – 45 | – 45 | – 42 | – 39 | – 33 | – 33 | ASTM D 97 |
| Neutralization number | mg KOH/g | 0.8 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | ASTM D 974 |
| Foaming, | |||||||||
| seq. I | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III |
| seq. II | ml | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | ASTM D 892 seq. I III |
| seq. III | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III |
| Copper corrosion | degree of corr. | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | ASTM D 130 |
| Rust prevention | pass B | pass B | pass B | pass B | pass B | pass B | pass B | ASTM D 665 | |
| Four ball EP test | N | 2200 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | ASTM D 2783 |
| FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | DIN 51 354-2 |